Search found 68 matches
- Wed Feb 27, 2019 7:28 pm
- Forum: Help and Troubleshooting
- Topic: Light is Blue
- Replies: 1
- Views: 5273
Light is Blue
Projector is projecting blue and not white light in contour. If go to menu in Vivitek the colors are fine
- Thu Sep 20, 2018 11:11 pm
- Forum: Help and Troubleshooting
- Topic: Flashing ??
- Replies: 3
- Views: 6614
Re: Flashing ??
These are Cherry resin, but it did do it in SolusProto. No slider in cherry profile
- Thu Sep 20, 2018 6:17 pm
- Forum: Help and Troubleshooting
- Topic: Flashing ??
- Replies: 3
- Views: 6614
Flashing ??
What is wrong? New projector, Resin, Quartz top
I checked all setting Full RBG and
projector Vivitek 1186
I checked all setting Full RBG and
projector Vivitek 1186
- Tue Jul 03, 2018 5:01 pm
- Forum: Hardware
- Topic: list of available projectors
- Replies: 16
- Views: 38478
Re: list of available projectors
Is Junction testing any projectors, I need going to need a new one. How hard is it use a different project? I have the Infocus And I found this one https://www.amazon.com/InFocus-IN3138HDa-Network-Projector-Lumens/dp/B00OZTOD4Q/ref=asc_df_B00OZTOD4Q/?tag=hyprod-20&linkCode=df0&hvadid=1981021...
- Thu Feb 01, 2018 1:08 am
- Forum: Help and Troubleshooting
- Topic: Too many Mis prints
- Replies: 8
- Views: 12357
Re: Too many Mis prints
Just so you know when I added one second and it would print.
I changed to a new bulb tried 2.6 seconds at 20 and had some pieces fail. So I'm going back to adding I second on the prints again and see if they all will again.
I changed to a new bulb tried 2.6 seconds at 20 and had some pieces fail. So I'm going back to adding I second on the prints again and see if they all will again.
- Thu Jan 25, 2018 3:22 am
- Forum: Help and Troubleshooting
- Topic: Too many Mis prints
- Replies: 8
- Views: 12357
Re: Too many Mis prints
Did you calibrate the grid to 80x45. Focus the projector, grid. Put the right arrangement of close up lenses? Could be a film problem. How old is the film? Put in at correct tension? So many things that can cause it. For what you are printing in those pic's, I don't see why you need the larger prin...
- Wed Jan 24, 2018 11:09 pm
- Forum: Help and Troubleshooting
- Topic: Too many Mis prints
- Replies: 8
- Views: 12357
Too many Mis prints
I think I always had too many mis-prints. but now I'm getting one of ten. And now I'm decided to figure out why I get so many. And never been successful at printing 80 x 45 The project has 800 hours on the bulb, but Infocus replace the machine a year ago. I lubricated the Z screw and increased expos...
- Fri Jun 30, 2017 4:35 pm
- Forum: Hardware
- Topic: cleaning the glass?
- Replies: 3
- Views: 7879
Re: cleaning the glass?
It might be dust on the inside of the quartz. I had a lot of problems with the prints failing last year because of dust on the quartz, mirror and glass, plus the projector. One problem is the front of the project is blowing straight in the edge of the printer.
- Thu Apr 20, 2017 11:16 pm
- Forum: Hardware
- Topic: Quartz Top
- Replies: 4
- Views: 9154
Quartz Top
My quartz top is separating from the top stainless steel platform. What do I use to fix it.
Thanks
Thanks
Re: Supports
i'm available Friday.