Search found 22 matches
- Wed Sep 16, 2020 11:34 pm
- Forum: Resins
- Topic: Solus Wax Pro
- Replies: 12
- Views: 27997
Re: Solus Wax Pro
I adjusted the printer and it is printing now to the correct sizes. However, it seems after the model is just doing all sorts of weird things. These photos show a disk that printed out 8 hours ago. When it came out of the printer it was perfectly flat and circular. Yet over time it just starts to di...
- Thu Sep 10, 2020 6:02 pm
- Forum: Resins
- Topic: Solus Wax Pro
- Replies: 12
- Views: 27997
Re: Solus Wax Pro
Quick question about the WAX PRO. First off, love this resin and our casting has never been better. But I've tried to look through the forum here to see if someone else has noticed this. It seems to me the prints shrinks a little. I let a ring that I printed sit around a couple of days and it had a ...
- Wed Jan 17, 2018 4:26 pm
- Forum: Help and Troubleshooting
- Topic: layer failures
- Replies: 14
- Views: 22711
Re: layer failures
Hi, I just wanted to know if this was resolved. I've been running the solus for quite some time now. I'm been getting great prints everyday weeks in a row printing on the larger platform settings. I just switched back to the 48x27 and a very similar error happens on the same line for me as well. I w...
- Sat Sep 16, 2017 8:30 pm
- Forum: Gallery
- Topic: Prints by Luke
- Replies: 4
- Views: 9583
- Sat Sep 16, 2017 8:19 pm
- Forum: Gallery
- Topic: First print using SolusCast
- Replies: 7
- Views: 12989
Re: First print using SolusCast
Great tip thank you. I did have a little trouble with the solus cast. Still trying to dial it in. I ended up regrowing it in the emerald green just to get it done.
- Thu Aug 24, 2017 11:07 pm
- Forum: Help and Troubleshooting
- Topic: Looking for advice on small issue
- Replies: 1
- Views: 4791
Looking for advice on small issue
Hello Fellow Solus Users, I've been wanting to post up a image of a common problem I've been having and I hope one of you maybe have some advice. Finnally I have a larger piece where it shows my issue. It is common in most of my rings but hard to photograph which makes it hard to show you guys. I hi...
- Thu Aug 24, 2017 6:24 pm
- Forum: Gallery
- Topic: First print using SolusCast
- Replies: 7
- Views: 12989
First print using SolusCast
Can't wait to cast!
- Fri Jul 28, 2017 4:56 pm
- Forum: General
- Topic: CONTOUR AUTO SUPORTS
- Replies: 2
- Views: 6314
CONTOUR AUTO SUPORTS
I was a bit late to the game updating my contour software this summer. I have to say the supports are awesome, Great job! I can't believe I've been spending all this time making my own supports, and I love how they tear away. Just a quick question for everyone. Do you tear off those supports after y...
- Fri Nov 18, 2016 8:17 pm
- Forum: General
- Topic: Cure Crazy
- Replies: 12
- Views: 19262
Re: Cure Crazy
Thanks for the heads up. Bursting into flames is not good
. I have noticed that they do get Hot. I'll keep an eye out for anything bad. You never know what your going to get when you start ordering stuff off of Amazon.- Fri Nov 18, 2016 5:37 pm
- Forum: General
- Topic: Cure Crazy
- Replies: 12
- Views: 19262
Cure Crazy
First off, just a respect to all the support monitors and users on this forum. I've learned so much and have read up on some great discussions that have made my user experience with the solus a great one. It's been bumpy at times but I've always been able to find the answers quickly through you guys...