Search found 14 matches
- Sat Jun 13, 2020 6:26 am
- Forum: General
- Topic: Solus for sale Europe
- Replies: 0
- Views: 7864
Solus for sale Europe
Solus printer with vivitec projector. PM for more info and pictures.
- Wed Jun 10, 2020 6:49 am
- Forum: Resins
- Topic: Bluecast for LCD/DLP
- Replies: 6
- Views: 10628
Re: Bluecast for LCD/DLP
OK what profile on contour should I use for 10x?
- Wed Jun 10, 2020 4:53 am
- Forum: Resins
- Topic: Bluecast for LCD/DLP
- Replies: 6
- Views: 10628
Re: Bluecast for LCD/DLP
Are you going to reply me ??
- Mon Jun 08, 2020 8:06 am
- Forum: Resins
- Topic: Bluecast for LCD/DLP
- Replies: 6
- Views: 10628
Re: Bluecast for LCD/DLP
https://www.bluecast.info/#products
Bluecast original
Bluecast original
- Sun Jun 07, 2020 6:11 am
- Forum: Resins
- Topic: Bluecast for LCD/DLP
- Replies: 6
- Views: 10628
Bluecast for LCD/DLP
A client of mine has ordered some prints and they were printed with Bluecast and he was happy with the results. So my question is can i use that resin with my Solus is there a suitable profile. Thank you.
- Sat Mar 09, 2019 11:40 am
- Forum: Help and Troubleshooting
- Topic: Casting advice needed
- Replies: 5
- Views: 11395
Re: Casting advice needed
It was a curing issue. The lamp that i used for emerald was not curing the soluscast. Changed the curing unit and it perfect now. Thank you.
- Mon Feb 11, 2019 7:39 am
- Forum: Help and Troubleshooting
- Topic: Casting advice needed
- Replies: 5
- Views: 11395
Re: Casting advice needed
It a small part that goes on top of a ring
- Sun Feb 10, 2019 3:11 pm
- Forum: Help and Troubleshooting
- Topic: Casting advice needed
- Replies: 5
- Views: 11395
Casting advice needed
I think its a curing issue, but any advice will be appreciated.
- Fri Feb 01, 2019 7:44 pm
- Forum: Help and Troubleshooting
- Topic: Bending in prints
- Replies: 3
- Views: 7008
Re: Bending in prints
??? this is on default what should i do move the corners apart or bring them closer to each other and what about the bending sideways i have watched the videos and i do the steps as its shown what am i missing ???
- Fri Feb 01, 2019 12:35 pm
- Forum: Help and Troubleshooting
- Topic: Bending in prints
- Replies: 3
- Views: 7008
Bending in prints
Noticed a strange bending when printing rectangular objects and it goes in both directions and gets worse when objects are taller. Even stranger when observed from above the shape and dimensions are fine. Help needed. Thank you.