Search found 24 matches

by Kokos
Thu Oct 29, 2020 11:46 am
Forum: Help and Troubleshooting
Topic: Warped print/how to support this?
Replies: 5
Views: 648

Re: Warped print/how to support this?

Very weird problem. Especially if all other models are good.
You could try to print the ring at an angle. Now it is straight but what if you have it at a 15 degree angle or more. Then the angle is not to much that you need to support the sides. But it might be big enough to solve your problem.
by Kokos
Mon Oct 26, 2020 7:07 pm
Forum: Help and Troubleshooting
Topic: Warped print/how to support this?
Replies: 5
Views: 648

Re: Warped print/how to support this?

Add supports to the side. Not where it is curved but BEFORE the curving starts and than maybe extra where it is actually curving. Or try supports on the inside of the shank Before the curving stars and then some more where it is curving. Also are other parts with the same or more height straight? If...
by Kokos
Thu Mar 26, 2020 1:33 pm
Forum: Help and Troubleshooting
Topic: How to fix this (streching?)?
Replies: 3
Views: 2341

Re: How to fix this (streching?)?

If it is in the Z direction it might be bleeding. Then you need to lower the exposure.
by Kokos
Thu Feb 27, 2020 8:11 pm
Forum: Hardware
Topic: Replacement Projector
Replies: 9
Views: 9633

Re: Replacement Projector

Correct :)

I meant the new "old" model Solus printers. They have a projector. But it is probably not the same model when you ordered a Solus years ago vs when recently ordering 1.
by Kokos
Thu Feb 27, 2020 10:16 am
Forum: Hardware
Topic: Replacement Projector
Replies: 9
Views: 9633

Re: Replacement Projector

You should ask your Dealer. I suppose new Solus printers also come with a different projector than in the past. Unless they have a secret stash of the old projectors.
by Kokos
Mon Jan 13, 2020 5:36 pm
Forum: Casting
Topic: Casting and Curing Tips for Easycast HD
Replies: 6
Views: 5305

Re: Casting and Curing Tips for Easycast HD

Thanks rkundla. I will keep on trying. My curing has to be good. After a couple hours in glycerine under UV. Turning every so often. I was planning on printing a bunch of the same model. Curing together and then sending them to different casters. And see what they make of it. Then I get a way of com...
by Kokos
Sat Jan 11, 2020 4:22 pm
Forum: Casting
Topic: Casting and Curing Tips for Easycast HD
Replies: 6
Views: 5305

Re: Casting and Curing Tips for Easycast HD

Sadly I do not know where it was located. I did not do the casting myself.

My suspicion is that the bad part was the lowest part of the model. So all ash fell to that side. But I might be wrong.

You think is is from overheating in the flask that caused this?
by Kokos
Sat Jan 11, 2020 2:50 pm
Forum: Casting
Topic: Casting and Curing Tips for Easycast HD
Replies: 6
Views: 5305

Re: Casting and Curing Tips for Easycast HD

Here some pictures taken through a loupe. As you can see one side looks pretty good. Otherside is a pity party :)
by Kokos
Sat Jan 11, 2020 2:48 pm
Forum: Casting
Topic: Casting and Curing Tips for Easycast HD
Replies: 6
Views: 5305

Casting and Curing Tips for Easycast HD

Hey Guys, I have printed some models with Easycast HD (brown) resin. Cured it under UV lamp 40Watt and submerged in glycerine. For several hours. After curing the models felt and sounded like plastic. I could not scratch them with my fingernails. One model I send to a caster. He has no problem with ...
by Kokos
Sat Jan 11, 2020 2:22 pm
Forum: Help and Troubleshooting
Topic: Print problem. What cause this issue?
Replies: 14
Views: 10065

Re: Print problem. What cause this issue?

If there is sunlight shining on your resinVat it might also cause small pieces to harden. A bit like cooking milk to long and a thin film will appear. filter your resin when pouring back in to your bottle. And filter your resin when pouring in to the vat. Also I sometimes get small flakes of resin o...