Search found 28 matches

by Kokos
Mon Feb 08, 2021 7:29 pm
Forum: Software
Topic: Matrix V9 for sale
Replies: 1
Views: 446

Re: Matrix V9 for sale

The going rate, I don't know. What I do know is that the licence for M9 is in your name/company name. If the customer wants to buy your M9 he also need to pay Gemvision to have the licence transfered to his name. Atleast that is how it worked when I worked for a GV dealer in Europe. You could of cou...
by Kokos
Thu Jan 14, 2021 4:08 pm
Forum: Casting
Topic: First Time Casting
Replies: 12
Views: 2003

Re: First Time Casting

Any updates? Did you find out what you needed to change to get good results?
by Kokos
Thu Jan 14, 2021 4:07 pm
Forum: Casting
Topic: silica free investment by stuller
Replies: 3
Views: 1680

Re: silica free investment by stuller

Have never heard of this investment before. I did some reading. It is actually made by GRS in UK. https://www.grscastingpowders.com/x-sil/ I was always worried about the silica when I did my own castings. I dont do my own castings anymore. But this investment sure sounds interesting. Why dont you gi...
by Kokos
Mon Dec 07, 2020 7:05 pm
Forum: Casting
Topic: First Time Casting
Replies: 12
Views: 2003

Re: First Time Casting

Your problem looks like ash. Possibly bad curing or bad burnout. I think burnout is the most likely. First you need to make sure your oven reaches the Temp. that you have set. Sometimes, especially when the coils get older, wont reach the set Temp. So maybe you have set the oven to 750C top but if i...
by Kokos
Thu Oct 29, 2020 11:46 am
Forum: Help and Troubleshooting
Topic: Warped print/how to support this?
Replies: 5
Views: 2735

Re: Warped print/how to support this?

Very weird problem. Especially if all other models are good.
You could try to print the ring at an angle. Now it is straight but what if you have it at a 15 degree angle or more. Then the angle is not to much that you need to support the sides. But it might be big enough to solve your problem.
by Kokos
Mon Oct 26, 2020 7:07 pm
Forum: Help and Troubleshooting
Topic: Warped print/how to support this?
Replies: 5
Views: 2735

Re: Warped print/how to support this?

Add supports to the side. Not where it is curved but BEFORE the curving starts and than maybe extra where it is actually curving. Or try supports on the inside of the shank Before the curving stars and then some more where it is curving. Also are other parts with the same or more height straight? If...
by Kokos
Thu Mar 26, 2020 1:33 pm
Forum: Help and Troubleshooting
Topic: How to fix this (streching?)?
Replies: 3
Views: 2840

Re: How to fix this (streching?)?

If it is in the Z direction it might be bleeding. Then you need to lower the exposure.
by Kokos
Thu Feb 27, 2020 8:11 pm
Forum: Hardware
Topic: Replacement Projector
Replies: 9
Views: 10744

Re: Replacement Projector

Correct :)

I meant the new "old" model Solus printers. They have a projector. But it is probably not the same model when you ordered a Solus years ago vs when recently ordering 1.
by Kokos
Thu Feb 27, 2020 10:16 am
Forum: Hardware
Topic: Replacement Projector
Replies: 9
Views: 10744

Re: Replacement Projector

You should ask your Dealer. I suppose new Solus printers also come with a different projector than in the past. Unless they have a secret stash of the old projectors.
by Kokos
Mon Jan 13, 2020 5:36 pm
Forum: Casting
Topic: Casting and Curing Tips for Easycast HD
Replies: 6
Views: 6022

Re: Casting and Curing Tips for Easycast HD

Thanks rkundla. I will keep on trying. My curing has to be good. After a couple hours in glycerine under UV. Turning every so often. I was planning on printing a bunch of the same model. Curing together and then sending them to different casters. And see what they make of it. Then I get a way of com...