Search found 50 matches
- Fri Jan 12, 2018 4:00 pm
- Forum: Tips and Tutorials
- Topic: Lubricant for Z-Screw
- Replies: 10
- Views: 31272
Re: Lubricant for Z-Screw
Every 4-6 months. I run the printer around 14-16 hours a day usually.
- Thu Jan 11, 2018 12:55 pm
- Forum: Tips and Tutorials
- Topic: Lubricant for Z-Screw
- Replies: 10
- Views: 31272
Lubricant for Z-Screw
Hey guys, So I asked the Reify folks for suggested lubricants and they did tell me a brand, but it was impossible to get in Europe, let alone the UK. Just wanted to say, I have been using Magnalube which is pretty widely available in Europe. It's very, very thin and you use barely any at a time. The...
- Wed Nov 29, 2017 7:57 pm
- Forum: Help and Troubleshooting
- Topic: Small issue with z-screw homing
- Replies: 3
- Views: 7367
Re: Small issue with z-screw homing
Sounds like bad motor from doing some tests with Mark and Jordi.
Amazing help from the team as always.
Amazing help from the team as always.
- Wed Nov 29, 2017 1:56 pm
- Forum: Help and Troubleshooting
- Topic: Small issue with z-screw homing
- Replies: 3
- Views: 7367
Small issue with z-screw homing
Hey folks, I've emailed Mark and Jordi about this to see if they know, but I thought I would also ask here in case anyone has already had this issue, or there's something really obvious that I have missed. Sadly, I tried to run the machine today as usual, but partway through the homing cycle, I thin...
- Sun Aug 06, 2017 7:29 pm
- Forum: Hardware
- Topic: The acrylic is not clear, has cracks inside.
- Replies: 4
- Views: 9175
Re: The acrylic is not clear, has cracks inside.
Same thing happened to mine, I need to get an aluminium one asap really!
- Sun Aug 06, 2017 7:28 pm
- Forum: Help and Troubleshooting
- Topic: [SOLVED] What cause this lines?
- Replies: 30
- Views: 43651
Re: What cause this lines?
Whenever I have had this issue, it's been the film.
- Sun Aug 06, 2017 7:26 pm
- Forum: Help and Troubleshooting
- Topic: First Printout Fail. Please help.
- Replies: 11
- Views: 18957
Re: First Printout Fail. Please help.
I think you need to angle it, so that no surface is perpendicular with the print bed. Everything should be at a slight slant, if that makes sense. The way I do supports is kind of, erm, wrong, but works for me and it's pretty easy. Use Manual supports in contour, use some larger ones (0.6mm) with no...
- Sun Aug 06, 2017 7:16 pm
- Forum: General
- Topic: looking to buy another 3d printer, suggestions?
- Replies: 7
- Views: 18284
Re: looking to buy another 3d printer, suggestions?
Get another Solus!
I would!
I would!
- Fri Jul 28, 2017 5:24 pm
- Forum: Software
- Topic: Support issue
- Replies: 3
- Views: 7969
Re: Support issue
Here's a step by step!
1. Open the file
2. Go to automatic support settings, change them to the desired settings. DO NOT CLICK GENERATE SUPPORTS.
3. Move one of your objects on the scene.
4. Hit restore supports.
Your supports should now have the desired base size and support thickness.
1. Open the file
2. Go to automatic support settings, change them to the desired settings. DO NOT CLICK GENERATE SUPPORTS.
3. Move one of your objects on the scene.
4. Hit restore supports.
Your supports should now have the desired base size and support thickness.
- Fri Jul 28, 2017 5:22 pm
- Forum: General
- Topic: silicone rubber does not cure solus proto resin
- Replies: 25
- Views: 39659
Re: silicone rubber does not cure solus proto resin
Hey guys,
That's great - thanks for letting me know. I'll run some tests.
200 degrees, I suppose that Farenheit, not celcius!
That's great - thanks for letting me know. I'll run some tests.
200 degrees, I suppose that Farenheit, not celcius!