Search found 1900 matches
- Wed Nov 25, 2015 11:02 pm
- Forum: Resins
- Topic: One quality higher than B9 Cherry?
- Replies: 46
- Views: 66544
Re: One quality higher than B9 Cherry?
The solus resin (currently in testing stages) will offer better quality prints, sharper corners and details, easier to print with (requires less supports), much easier post cleanup and is more durable. Also, it doesn't need excessive post curing after it's been printed. Oh ya, and it's castable. Hop...
- Wed Nov 25, 2015 6:48 pm
- Forum: Resins
- Topic: One ring to rule them all
- Replies: 4
- Views: 10952
Re: One ring to rule them all
25 microns.
- Fri Nov 20, 2015 5:01 pm
- Forum: Gallery
- Topic: More prints
- Replies: 14
- Views: 22963
Re: More prints
Wow Len! That sure was an onslaught of new images They look great. Nice castings too.
- Tue Nov 17, 2015 12:09 am
- Forum: Help and Troubleshooting
- Topic: Mis prints
- Replies: 51
- Views: 71089
Re: Mis prints
Your supports are wrong. You are supposed to have small bases below each support. Around 4mm in diameter min and about 0.3mm thin. Or else the supports can actually pull up on the film and create small bumps. That will degrade the film and cause the failures you are seeing.
- Tue Nov 17, 2015 12:05 am
- Forum: Tips and Tutorials
- Topic: Procedure or Check List for 25 to 41 and back again.
- Replies: 26
- Views: 43878
Re: Procedure or Check List for 25 to 41 and back again.
Just measure how much you need to move it, then point the projector at the wall and move it from the menu in that direction. The horizontal shift is limited to about 50 pixels to the left or to the right, so it's not a huge move.
- Mon Nov 16, 2015 4:33 pm
- Forum: Resins
- Topic: New Resin Development
- Replies: 40
- Views: 66201
Re: New Resin Development
We are still working on it. Once it is ready to be released, we will announce it.
- Fri Nov 13, 2015 7:05 pm
- Forum: Tips and Tutorials
- Topic: Procedure or Check List for 25 to 41 and back again.
- Replies: 26
- Views: 43878
Re: Procedure or Check List for 25 to 41 and back again.
Just emailed them to you Todd.
- Fri Nov 13, 2015 12:39 am
- Forum: Help and Troubleshooting
- Topic: Mis prints
- Replies: 51
- Views: 71089
Re: Mis prints
Hi Eddy,
That skull is solid? Have you though about hollowing it out a bit?
Contact me if you need help with your supports.
info@junction3d.com
That skull is solid? Have you though about hollowing it out a bit?
Contact me if you need help with your supports.
info@junction3d.com
- Thu Nov 12, 2015 12:52 am
- Forum: Gallery
- Topic: Prints by Monger
- Replies: 173
- Views: 369924
Print of a model by Bruno Ribeiro
It's a part of bracelet link. I left it in the sun to cure for too long and it curved a little.
- Thu Nov 12, 2015 12:52 am
- Forum: Gallery
- Topic: Prints by Monger
- Replies: 173
- Views: 369924
Prints by Monger
I wanted to start this thread, so that I can post prints here instead of keep on making new threads.