Search found 787 matches
- Sun Sep 15, 2019 3:15 am
- Forum: General
- Topic: Calibration Problem
- Replies: 3
- Views: 10579
Re: Calibration Problem
I guess your talking about the gird sizes. It's best to use a very thin piece of paper. Some use graph paper. Draw a precise rectangle for the size of each and place on quartz and project the gird. Use the software to adjust the corners and middle. Not sure what you mean by "size of bath" ...
- Thu Sep 05, 2019 12:32 am
- Forum: Software
- Topic: Software Lockup when Printer Not Attached
- Replies: 8
- Views: 18797
Re: Software Lockup when Printer Not Attached
open Contour, and go to Help there should be a " check for updates" There might be a box to check to get Beta versions. Check this and it should automatically download the update.
- Wed Sep 04, 2019 1:16 am
- Forum: Software
- Topic: Software Lockup when Printer Not Attached
- Replies: 8
- Views: 18797
Re: Software Lockup when Printer Not Attached
You might want to update contour at least. Maybe the older versions would not open if printer not connected.
- Tue Sep 03, 2019 1:32 am
- Forum: Help and Troubleshooting
- Topic: Failed prints: a number of layers FULLY cured
- Replies: 10
- Views: 26742
Re: Failed prints: a number of layers FULLY cured
I had a win update Friday and had the same thing happen. Checked my RGB setting and sure enough, it was set back to normal. So I'm guessing they had an update to the video driver.
- Tue Sep 03, 2019 1:30 am
- Forum: Software
- Topic: Software Lockup when Printer Not Attached
- Replies: 8
- Views: 18797
Re: Software Lockup when Printer Not Attached
I unplugged my printer and projector from the laptop and opened Contour just fine. So it must be something with the computer. Is your Contour up to date? I hate windows updates. I think they should always ask if you want to update. Tell what they are updating and deleting. Just like this last update...
- Mon Sep 02, 2019 2:57 am
- Forum: Software
- Topic: Software Lockup when Printer Not Attached
- Replies: 8
- Views: 18797
Re: Software Lockup when Printer Not Attached
I can open Contour on my home computer. I never have had the printer hooked up to it. So don't know why it wouldn't open on the laptop. Will have to see tomorrow. It could be due to a windows update.
- Fri Aug 30, 2019 3:20 am
- Forum: Help and Troubleshooting
- Topic: Help Diagnosing Failed print cause
- Replies: 4
- Views: 11644
Re: Help Diagnosing Failed print cause
glad to hear you got it going. The emerald green need to be mixed- shaken very very well. The pigment separated and would stick to the bottom of the bottle. Hard to get it to mix well. That's why many of us put stainless nuts in our resin to help mix it well.
- Fri Aug 30, 2019 3:14 am
- Forum: Help and Troubleshooting
- Topic: Quartz Detached from Printer
- Replies: 10
- Views: 22380
Re: Quartz Detached from Printer
Big reason for the tape to loosen is too much heat from the projector. Need to have a small fan to blow heat away. Also will help in bulb life.
Yes it is a Royal Pain to clean up resin that gets into the printer.
Yes it is a Royal Pain to clean up resin that gets into the printer.
- Tue Aug 27, 2019 12:32 am
- Forum: Resins
- Topic: how many people use the B9 resins on the solus ?
- Replies: 22
- Views: 50914
Re: how many people use the B9 resins on the solus ?
Try your local drug store.
From what I have read on other post, about an hour in straight glycerin.
From what I have read on other post, about an hour in straight glycerin.
- Fri Aug 16, 2019 2:18 am
- Forum: Resins
- Topic: ResinWorks EasyCastHD castable resin
- Replies: 72
- Views: 158382
Re: ResinWorks EasyCastHD castable resin
I've been getting great results with the SolusCast.