Curing Unit

[M-Williams]

LED is King when it comes to big pieces curing. http://www.ebay.com/itm/QUANS-110V-20W- ... 46587158cf . It got the same LED's as the B9c curing unit or the envisiontec box.

[Kerstien]

get the B9 cure box. 10 min your done

I got the B9 curing box the small one but im afraid that it doesn't cure well, infect after i always put them in my other home made curing box. What do you think, curing it with the B9 curing box is the enough so when i cast i dont get problems ?

[M-Williams]

If you have the B9 curing unit. I would suggest you cure them in water, This is what the manufacturer requires. All the B9 folks that I know cure their prints in water

[Archerm]

I ordered two of the QUANS 110V 30W UV Ultra Violet High Power LED Lights this morning. will give a report

[Devlin]

I have tried the smaller b9 unit under water and out of, they stay tacking when cured without water.

Under water 9 minutes small or large rings, really heavy silver men's rings have been casting well with only 9 minutes of light box cure, no microwave, no other cure method.

Using B9 resins only emerald and cherry

[Kerstien]

Thanks for your help

[mongerdesigns]

I've been using this one and it's really powerful. Cures prints fully in 30-60 min for most resins.

http://www.junction3d.com/buy/led-light-cure-box

[Jewelermdt]

Looks like the B9. Maybe see if they can add buttons for preset times like the B9.

[mongerdesigns]

There are 3 preset buttons. Can program them by holding the button down.

[rsaldivar]

max on the B9 box is 9 min. , can this one do an hour ? non stop ?