Curing Unit
- M-Williams
- Solus Master
- Posts:393
- Joined:Sun Nov 01, 2015 4:45 pm
The 50W are great. the Turntable let you piece cure evenly.
Re: Curing Unit
just comparing it to LED Light Cure Box on junction3d site the listed effective wavelength range is from 380~420nm (Peak 405nm).
Quans 20W & 50W listed as Wavelength 395nm to 400nm.
Does this matter that the wavelength isn't as broad?
Quans 20W & 50W listed as Wavelength 395nm to 400nm.
Does this matter that the wavelength isn't as broad?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Curing Unit
It matters. Wider wavelength range works well with more types of resins.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Curing Unit
You never know what resin you'll be using tomorrow. You won't be changing your curing unit though so invest in a good one like the one Junction is selling and you're golden.
Re: Professional Curing Unit
Last edited by baldwini on Thu Oct 05, 2017 4:02 pm, edited 3 times in total.
Re: Curing Unit
Dang Baldwini, do you have one of those Intel i9's inside that you need to liquid cool?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Professional Curing Unit
baldwini wrote:
Most advanced custom build professional curing unit
Ha! Gary. Now all you’re missing is a Solus.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Curing Unit
rkundla wrote:Dang Baldwini, do you have one of those Intel i9's inside that you need to liquid cool?
Yes
Re: Professional Curing Unit
mongerdesigns wrote:baldwini wrote:
Most advanced custom build professional curing unit
Ha! Gary. Now all you’re missing is a Solus.
I have a little better printer which is Rapidshape S90
Re: Curing Unit
so I see it heats up the chamber and has a timer , and UV , just wondering about oxygen ? do you put the models in water or does the chamber have a vacuum or compressor to to create a oxygen free environment ? also , how much is one of those ??
Who is online
Users browsing this forum: No registered users and 4 guests