Page 1 of 1
Support removal tools
Posted: Wed Apr 19, 2017 11:54 am
by Kerstien
Tools
Re: Support removal tools
Posted: Fri Apr 28, 2017 4:11 pm
by Archerm
I have a special set of micro flush cutters that work well. My goto support removal tool is a ground down hart burr. It makes quick work of supports.
Re: Support removal tools
Posted: Fri Apr 28, 2017 4:43 pm
by M-Williams
That's Neat .
Re: Support removal tools
Posted: Sat Apr 29, 2017 3:47 am
by Jewelermdt
I use a separating disk for easy to get to supports.
Re: Support removal tools
Posted: Thu May 11, 2017 1:41 pm
by Kerstien
Archerm wrote:I have a special set of micro flush cutters that work well. My goto support removal tool is a ground down hart burr. It makes quick work of supports.
I use that and the round ball but for more intricate/hidden/hard to get supports i use the carving tool
Re: Support removal tools
Posted: Thu May 11, 2017 9:32 pm
by jdwages
I took and old pair of long needle nose pliers, too flimsy to be much good for bench work and ground them into a pair of fine cutters with a long reach. They work very well.