Bad Print
Are you sure your build plate is well calibrate?
-
- Novice
- Posts:11
- Joined:Fri Aug 12, 2016 4:56 am
Re: Bad Print
Hi,
I've emailed you.
I've emailed you.
Re: Bad Print
Seem to be same problem
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Bad Print
@haipham I don't think so. You might be using a fake bulb in your projector. We recommend using only original manufacturer bulbs.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Bad Print
mongerdesigns wrote:@haipham I don't think so. You might be using a fake bulb in your projector. We recommend using only original manufacturer bulbs.
i think bulb is ok because dont have flicker yet and image on wall is good but some other problem
-
- Novice
- Posts:11
- Joined:Fri Aug 12, 2016 4:56 am
Re: Bad Print
After a week of activities
I realized that the problem printing the mirrors were dirty
After cleaning the mirror by soft tissue
All prints are healthy![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
I realized that the problem printing the mirrors were dirty
After cleaning the mirror by soft tissue
All prints are healthy
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Who is online
Users browsing this forum: No registered users and 38 guests