Since 1 week our solus makes everythime at layer 407 these shifted layers.. i don't know what to do ....
Our solus had no problems since 3 months.. and now everytime..
Best regards!
layer failures
-
- Novice
- Posts:47
- Joined:Thu Sep 29, 2016 8:01 pm
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: layer failures
Clean the lead screw with a paper towel and some alcohol and then apply some fresh grease. Then run the arm up and down a few times to lubricate. Most likely some dirt is packed into the thread at that location and is causing a shift when moving through.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:47
- Joined:Thu Sep 29, 2016 8:01 pm
Re: layer failures
Sadly it didn't help. everytime at the same layers. is it possible, that there is something in te slus that causes this error ?
Its really a problem.. we need our solus every day - is there a possability to get helped in Austria?
Bought the solus frm Spain
Best regards ! and thank you
Its really a problem.. we need our solus every day - is there a possability to get helped in Austria?
Bought the solus frm Spain
Best regards ! and thank you
Re: layer failures
Hi,
Do you mean here?
Do you have any other examples? It's hard to see what's happening in this one.
Do you mean here?
Do you have any other examples? It's hard to see what's happening in this one.
-
- Novice
- Posts:47
- Joined:Thu Sep 29, 2016 8:01 pm
Re: layer failures
Yes exactly!
There are 2 layers that making problems.. but why?.
On the foto you cannot see it perfectly:
Where you mae the jellow circle is the layer not shifted to the right or the left - you see it when you look from the side on the model - i will upload some more photos tomorrow.
we tried different models.. but without success. Alwasy the same layers!
Thank you very much !!
There are 2 layers that making problems.. but why?.
On the foto you cannot see it perfectly:
Where you mae the jellow circle is the layer not shifted to the right or the left - you see it when you look from the side on the model - i will upload some more photos tomorrow.
we tried different models.. but without success. Alwasy the same layers!
Thank you very much !!
-
- Novice
- Posts:47
- Joined:Thu Sep 29, 2016 8:01 pm
Re: layer failures
Here is the photo..
every print everytiem the same thing.
layer 406 and layer 423...
Thank you very much in advance !
every print everytiem the same thing.
layer 406 and layer 423...
Thank you very much in advance !
Re: layer failures
Please email me at reify3d@gmail.com when you're free and I'll take a look at a couple of your computer settings.
-
- Novice
- Posts:47
- Joined:Thu Sep 29, 2016 8:01 pm
Re: layer failures
So - we resetted everything, now it seems, that solved the problem!!!
Maybe any bug, that causes this problem.
Thank you for your help. tomorrow i will see if everything is fine
Maybe any bug, that causes this problem.
Thank you for your help. tomorrow i will see if everything is fine
-
- Novice
- Posts:47
- Joined:Thu Sep 29, 2016 8:01 pm
Re: layer failures
Ah... came again
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: layer failures
I believe he meant Re-set all the settings.
Who is online
Users browsing this forum: No registered users and 11 guests