made it again
new printer, first problems
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: new printer, first problems
Make sure you are shaking and mixing the bottle of resin really really well. Put some heavy bolts inside the bottle and shake it.
Empty the resin from the resin tank (into a separate container or bottle) and start with again with new resin that's been mixed very well in the bottle.
Empty the resin from the resin tank (into a separate container or bottle) and start with again with new resin that's been mixed very well in the bottle.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: new printer, first problems
Check your full rgb settings, and also check your projector menu settings according to the setup instructions. Looks like your background projection is too bright.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: new printer, first problems
The rgb settings are ok , maybe the background, in witch options can I change it?
Thanks for your time!!, I Appreciate
Thanks for your time!!, I Appreciate
Who is online
Users browsing this forum: No registered users and 11 guests