Hello everybody,
I hope someone can help me
my printer does no more print successfully,
the result is always the same as in the photos.
I have printed with solus wax and emerald and it's always the same result like in the photos.
what can that cause..please help.
problem!!! why does that happen?
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: problem!!! why does that happen?
I would start by checking everything is set correctly. Did you have a window update? This will sometimes change settings back to default. Re calibrate the grid and focus.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: problem!!! why does that happen?
Is the uv filter removed from the projector bulb?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: problem!!! why does that happen?
Yes the uv filter is removed from the projector bulb.Today i recalibrate the grid and focus and check the projector settings as in the Manual ...but the results are the same like in the photos. few weeks ago i print Emerald and solusProto, solusCast successfuly. I'll try tomorrow to print with another laptop.
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: problem!!! why does that happen?
Can you give a screenshot of the model in contour? You did change the resin option to the emerald profile? Did that myself.
Re: problem!!! why does that happen?
Hi.
Today i print with another laptop, i have tried to print different models but the results are the same like in the photos.I never change the resin option.Then i check the rgb settings but in my opinion they are correct... here i have screenshots of my rgb settings...what do you mean.
Ps. sorry the settings are in german, i did not know how to change the language.
Today i print with another laptop, i have tried to print different models but the results are the same like in the photos.I never change the resin option.Then i check the rgb settings but in my opinion they are correct... here i have screenshots of my rgb settings...what do you mean.
Ps. sorry the settings are in german, i did not know how to change the language.
Who is online
Users browsing this forum: No registered users and 8 guests