I have problems printing, I'm using SolusCast and I have not managed to print anything, it sticks in the background. The configuration I'm using is the default one in SolusContour.
Please help.
Tengo problemas para imprimir, estoy usando SolusCast y no eh logrado imprimir nada, se me pega en el fondo.La configuración que estoy usando es la que viene por defecto en SolusContour.
Ayuda porfavor.
Printing problem!¡
- Basster007
- Posts:4
- Joined:Mon Oct 08, 2018 11:50 pm
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Printing problem!¡
All of a sudden I can't get anything to print also. Was going great till last week. Thought it was my bulb, put a new one in and still nothing. Half a ring will print. Are you using the lattice to help hold print to build plate?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Printing problem!¡
Basster007 wrote:I have problems printing, I'm using SolusCast and I have not managed to print anything, it sticks in the background. The configuration I'm using is the default one in SolusContour.
Please help.
Tengo problemas para imprimir, estoy usando SolusCast y no eh logrado imprimir nada, se me pega en el fondo.La configuración que estoy usando es la que viene por defecto en SolusContour.
Ayuda porfavor.
Check your FULL RGB settings. It's possible after a windows update it was reset.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Printing problem!¡
Jewelermdt wrote:All of a sudden I can't get anything to print also. Was going great till last week. Thought it was my bulb, put a new one in and still nothing. Half a ring will print. Are you using the lattice to help hold print to build plate?
Which resin, which projector? Maybe post a photo so we can help.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Printing problem!¡
infocus 8606 solus wax resin. I plan on going through all setup again. After Hurricane Michael goes away. Looks like I will just miss the really bad part of it. Maybe 3rd time will be the charm. Getting behind in work. Thank goodness I have a mill.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Printing problem!¡
You need to bump up the exposure with infocus because it’s a little weaker. Try a test model and keep increasing the exposure until you get a full print. Initially try 0.5 seconds more.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Printing problem!¡
Ok Will try that.
- Basster007
- Posts:4
- Joined:Mon Oct 08, 2018 11:50 pm
Re: Printing problem!¡
I have already managed to print with SolusCast, although I also have some SolusWax and this does not stick to the platform despite adding the gel.
Gracias por su ayuda.
Ya eh logrado imprimir con SolusCast, aunque también tengo un poco de SolusWax y esta no de adhiere a la plataforma a pesar de agregarle el gel.
Thaks for you help.
Gracias por su ayuda.
Ya eh logrado imprimir con SolusCast, aunque también tengo un poco de SolusWax y esta no de adhiere a la plataforma a pesar de agregarle el gel.
Thaks for you help.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Printing problem!¡
Adding the gel? I hope you don't add it to the resin. You need to brush a few drops on the build plate.
Also make sure you're selecting the SolusWax profile.
Also make sure you're selecting the SolusWax profile.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 6 guests