SolusWax printing problem

This section is for specific instructions for daily operations of the Solus printer and for troubleshooting. User submitted tips, etc. should go in the "Tips and Tutorials" section.
User avatar
Basster007
Posts:4
Joined:Mon Oct 08, 2018 11:50 pm
SolusWax printing problem

Postby Basster007 » Thu Oct 11, 2018 2:04 pm

Buenas tardes, estoy teniendo problemas de impresión con SolusWax. ¿Qué me recomiendan oara imprimir con esta resina? Anteriormente eh impreso con SolusCast pero en cambio con esa tengo problemas de vaceo (utilizando los tiempos de jorneado que aquí en el foro plantean), quisiera probar con SolusWax a ver como me va con el vaceo pero como ya dije, no logro imprimir con esta resina.

Good afternoon, I'm having printing problems with SolusWax. What do you recommend to me to print with this resin? Previously eh printed with SolusCast but instead with that I have vaceo problems (using the times of day that here in the forum pose), I would like to try SolusWax to see how I'm doing with the vaceo but as I said, I can not print with this resin.
Attachments
20181010_230527.jpg
20181010_230513.jpg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: SolusWax printing problem

Postby mongerdesigns » Thu Oct 11, 2018 4:04 pm

When did you purchase your resin and who did you buy it from?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
jisaac
Novice
Posts:55
Joined:Fri Jun 10, 2016 10:47 am

Re: SolusWax printing problem

Postby jisaac » Tue Oct 16, 2018 7:10 pm

Hello,

I purchase this sample bottle last week from Jordi.
I have tried for the first time the SolusWax resin.
I made two failed tests.
I got the same result.

DSC_0002_BURST20181016121741714.JPG


It seems that the only 3 initials layers works.

By the way I prefer using my 3D software to add supports (Blender) because of severals features like mirror.

DSC_0002_BURST20181016121741715.JPG


So I thought the test of a lattice like support I designed was maybe the reason of this failure. So I add a classic stick support to check this case, and increase exposure from 5 to 5.5 secondes.
Same result only initials layers works.
I don't think that bulb is old because since I have received my solus I spent less than 300ml of resin.
The film is fresh replaced.
Do you have an idea. Increase more exposure ?
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: SolusWax printing problem

Postby mongerdesigns » Tue Oct 16, 2018 11:15 pm

Contact Jordi and he will help you find a solution.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: SolusWax printing problem

Postby Jewelermdt » Wed Oct 17, 2018 3:46 am

Check you supports for thickness. Solus Wax likes to be supported well. I use 1.5 mm tubes and .8 tips.
I just put in a new bulb and was not getting anything to print. I did get a good print today using the thicker supports. But I think my problem is the projector keeps loosing my settings. Frustrating.

Who is online

Users browsing this forum: No registered users and 8 guests