Buenas tardes, estoy teniendo problemas de impresión con SolusWax. ¿Qué me recomiendan oara imprimir con esta resina? Anteriormente eh impreso con SolusCast pero en cambio con esa tengo problemas de vaceo (utilizando los tiempos de jorneado que aquí en el foro plantean), quisiera probar con SolusWax a ver como me va con el vaceo pero como ya dije, no logro imprimir con esta resina.
Good afternoon, I'm having printing problems with SolusWax. What do you recommend to me to print with this resin? Previously eh printed with SolusCast but instead with that I have vaceo problems (using the times of day that here in the forum pose), I would like to try SolusWax to see how I'm doing with the vaceo but as I said, I can not print with this resin.
SolusWax printing problem
- Basster007
- Posts:4
- Joined:Mon Oct 08, 2018 11:50 pm
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: SolusWax printing problem
When did you purchase your resin and who did you buy it from?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: SolusWax printing problem
Hello,
I purchase this sample bottle last week from Jordi.
I have tried for the first time the SolusWax resin.
I made two failed tests.
I got the same result.
It seems that the only 3 initials layers works.
By the way I prefer using my 3D software to add supports (Blender) because of severals features like mirror.
So I thought the test of a lattice like support I designed was maybe the reason of this failure. So I add a classic stick support to check this case, and increase exposure from 5 to 5.5 secondes.
Same result only initials layers works.
I don't think that bulb is old because since I have received my solus I spent less than 300ml of resin.
The film is fresh replaced.
Do you have an idea. Increase more exposure ?
I purchase this sample bottle last week from Jordi.
I have tried for the first time the SolusWax resin.
I made two failed tests.
I got the same result.
It seems that the only 3 initials layers works.
By the way I prefer using my 3D software to add supports (Blender) because of severals features like mirror.
So I thought the test of a lattice like support I designed was maybe the reason of this failure. So I add a classic stick support to check this case, and increase exposure from 5 to 5.5 secondes.
Same result only initials layers works.
I don't think that bulb is old because since I have received my solus I spent less than 300ml of resin.
The film is fresh replaced.
Do you have an idea. Increase more exposure ?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: SolusWax printing problem
Contact Jordi and he will help you find a solution.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: SolusWax printing problem
Check you supports for thickness. Solus Wax likes to be supported well. I use 1.5 mm tubes and .8 tips.
I just put in a new bulb and was not getting anything to print. I did get a good print today using the thicker supports. But I think my problem is the projector keeps loosing my settings. Frustrating.
I just put in a new bulb and was not getting anything to print. I did get a good print today using the thicker supports. But I think my problem is the projector keeps loosing my settings. Frustrating.
Who is online
Users browsing this forum: No registered users and 9 guests