Re: Drop in intensity on infocus projector
Posted: Sun Dec 09, 2018 3:37 am
A lot depends on bulb age- hours of use. I had just put in a new bulb. My setting in the projector menu I believe is at 50 or 55%. If you have a lot of hours on the bulb, you might need 60% to 65%. It's a trial and error thing.
Course other things could be culprit , like film tension, dents in it, resin on lens or front glass of printer.
Course other things could be culprit , like film tension, dents in it, resin on lens or front glass of printer.