auto support on mirco prongs heavy ring

General topics about 3d printing.
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:
Re: auto support on mirco prongs heavy ring

Postby Jewelermdt » Thu May 25, 2017 2:40 am

You would have to support every prong growing upside down. You can't rely on contour support generator supporting every one. Would have to look close to add where needed. I was thinking it might grow better that way. That one is a challenge not matter what.
dcpattni
Novice
Posts:97
Joined:Sat May 07, 2016 4:55 pm
Location:Dar-es-salaam,TANZANIA
Contact:

Re: auto support on mirco prongs heavy ring

Postby dcpattni » Thu May 25, 2017 3:45 am

hello Everyone,

thank you for yr supportive answers.....I'll surely try in 2 part and 1 pc with very tiny supports......what ever result comeout will post here!!

again thanks
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: auto support on mirco prongs heavy ring

Postby Archerm » Thu May 25, 2017 3:13 pm

Remember you don't always have to support to the base. You can support to the piece as well.
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: auto support on mirco prongs heavy ring

Postby mongerdesigns » Thu May 25, 2017 4:34 pm

I sometimes use the tiniest of supports for prongs and delicate details. With the upcoming Solus castable resin it will be even easier to remove them. Those are completely automated supports by the way.

https://www.instagram.com/p/BUhZ-9ODurf/?taken-by=junction3d
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
jdwages
Novice
Posts:38
Joined:Mon Aug 24, 2015 5:09 pm
Location:Gulfport Mississippi

Re: auto support on mirco prongs heavy ring

Postby jdwages » Thu May 25, 2017 7:53 pm

That looks very promising Emil.
How does it cast compared to b9 resins?
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: auto support on mirco prongs heavy ring

Postby mongerdesigns » Thu May 25, 2017 8:19 pm

Casts very well and we have only tested with regular SatinCast investment.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: auto support on mirco prongs heavy ring

Postby Jewelermdt » Fri May 26, 2017 4:12 am

Can't wait. Can we pre order???
A.Joa1
Novice
Posts:54
Joined:Sat Dec 03, 2016 11:43 am

Re: auto support on mirco prongs heavy ring

Postby A.Joa1 » Fri May 26, 2017 5:08 am

Is it stable/forgiving like the SolusProto?
dcpattni
Novice
Posts:97
Joined:Sat May 07, 2016 4:55 pm
Location:Dar-es-salaam,TANZANIA
Contact:

Re: auto support on mirco prongs heavy ring

Postby dcpattni » Fri May 26, 2017 5:43 pm

@ mongerdesigns,

Request can you plz try with new resin (SOLUS blue resin) ring which I posted......also share supports sizes etc.
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: auto support on mirco prongs heavy ring

Postby rsaldivar » Sat May 27, 2017 5:22 pm

This stuff is awesome , and fixes ALL the fail problems , very strong resin enabling all the fine detail to grow sharp , cant wait to get some

Who is online

Users browsing this forum: No registered users and 14 guests