auto support on mirco prongs heavy ring
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
You would have to support every prong growing upside down. You can't rely on contour support generator supporting every one. Would have to look close to add where needed. I was thinking it might grow better that way. That one is a challenge not matter what.
Re: auto support on mirco prongs heavy ring
hello Everyone,
thank you for yr supportive answers.....I'll surely try in 2 part and 1 pc with very tiny supports......what ever result comeout will post here!!
again thanks
thank you for yr supportive answers.....I'll surely try in 2 part and 1 pc with very tiny supports......what ever result comeout will post here!!
again thanks
Re: auto support on mirco prongs heavy ring
Remember you don't always have to support to the base. You can support to the piece as well.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: auto support on mirco prongs heavy ring
I sometimes use the tiniest of supports for prongs and delicate details. With the upcoming Solus castable resin it will be even easier to remove them. Those are completely automated supports by the way.
https://www.instagram.com/p/BUhZ-9ODurf/?taken-by=junction3d
https://www.instagram.com/p/BUhZ-9ODurf/?taken-by=junction3d
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: auto support on mirco prongs heavy ring
That looks very promising Emil.
How does it cast compared to b9 resins?
How does it cast compared to b9 resins?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: auto support on mirco prongs heavy ring
Casts very well and we have only tested with regular SatinCast investment.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: auto support on mirco prongs heavy ring
Can't wait. Can we pre order???
Re: auto support on mirco prongs heavy ring
Is it stable/forgiving like the SolusProto?
Re: auto support on mirco prongs heavy ring
@ mongerdesigns,
Request can you plz try with new resin (SOLUS blue resin) ring which I posted......also share supports sizes etc.
Request can you plz try with new resin (SOLUS blue resin) ring which I posted......also share supports sizes etc.
Re: auto support on mirco prongs heavy ring
This stuff is awesome , and fixes ALL the fail problems , very strong resin enabling all the fine detail to grow sharp , cant wait to get some
Who is online
Users browsing this forum: No registered users and 4 guests