Hey all, I've been getting prints where when almost finished it creates a bulge. I haven't been able to get a smooth print.
this is starting to happen in smaller designs. I have checked the film and put new resin. some items print fine then the bulge
does anyone have any similar problem. Help...
bulge on print
-
- Novice
- Posts:33
- Joined:Fri Dec 11, 2015 5:03 am
- Attachments
-
- WIN_20170710_10_08_06_Pro (2).jpg (32.05KiB)Viewed 8003 times
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: bulge on print
Can't tell anything from that small photo. Maybe post a larger one, and from multiple angles?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:33
- Joined:Fri Dec 11, 2015 5:03 am
Re: bulge on print
sorry for the delay here are a couple of pics of the ring with the bulge and there are several others. my prints right now are hit and miss.
- Attachments
-
- WIN_20170712_12_52_03_Pro_LI.jpg (94.94KiB)Viewed 7960 times
-
- WIN_20170712_12_51_51_Pro_LI.jpg (74.02KiB)Viewed 7960 times
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: bulge on print
What resin is this?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:33
- Joined:Fri Dec 11, 2015 5:03 am
Re: bulge on print
this is the b9 green resin. Its been the only one ive been using. I never have had this happen. now many of the prints come out like this.
I try different places on the print head and I filter the resin before prints. just cant crack this nut???? small rings seem to print ok but I still get
some bulge
I try different places on the print head and I filter the resin before prints. just cant crack this nut???? small rings seem to print ok but I still get
some bulge
Who is online
Users browsing this forum: No registered users and 1 guest