list of available projectors
Thanks Emil!
Re: list of available projectors
Is Junction testing any projectors, I need going to need a new one. How hard is it use a different project? I have the Infocus And I found this one https://www.amazon.com/InFocus-IN3138HD ... 3153&psc=1
I guess my lens will fit.
I guess my lens will fit.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: list of available projectors
That projector should work Eddy. You may need to adjust the brightness down a bit though and play around with that because it's much stronger.
We sell the Vivitek 1186 for $949
We sell the Vivitek 1186 for $949
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: list of available projectors
mongerdesigns wrote:The only one we sell and provide right now is the Vivitek 1186 for $950 plus shipping.
I can't find these in the store. My optima HD37 blew up. I'll take the Viviteck 1186 for $950 plus shipping. I'll need to expedite that shipping.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: list of available projectors
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: list of available projectors
Just after messaging I did get one online. This is the only 3D printer in my shop so it has to be available to print as orders come in. Not knowing if you still carried them I just went ahead to make sure one was on the way.
I have no idea what happened to my Optoma. I took the plastic cover off the lamp, loosened 2 screws holding the lamp, inserted the new lamp, tightened the 2 screws, replaced the plastic cover, plugged the projector back it, it popped, smoked, sparks flew, heat glass cracked. I am completely lost as to what happened. My immediate guess is that the new lamp had a short. Here is what I do know, it cost me $1100 for a new projector.
Can you direct me to the Vivitek H1180HD setup page? I assume nothing changes with the computer setup.
Thank you
I have no idea what happened to my Optoma. I took the plastic cover off the lamp, loosened 2 screws holding the lamp, inserted the new lamp, tightened the 2 screws, replaced the plastic cover, plugged the projector back it, it popped, smoked, sparks flew, heat glass cracked. I am completely lost as to what happened. My immediate guess is that the new lamp had a short. Here is what I do know, it cost me $1100 for a new projector.
Can you direct me to the Vivitek H1180HD setup page? I assume nothing changes with the computer setup.
Thank you
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: list of available projectors
We don’t have experience with the Vivitek 1180. I’m assuming the setup will be similar to the 1185/1186
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 3 guests