Glass lifted off frame .
-
- Posts:1
- Joined:Tue Sep 18, 2018 8:49 am
Hi user , anyone had this issue ? Glass lifted off frame. Can it just be glued back on with silicon ? Thx in advance .
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Glass lifted off frame .
The glass is removable for easy cleaning and replacement of it breaks. Shouldn’t come out by itself though. Use double sided lcd tape. 2mm. Sold on Amazon.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Glass lifted off frame .
Does it get hot where your printer is? Do you have a fan to blow the heat from projector away from printer? Heat is most likely the cause of the tape failing. BTDT
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Glass lifted off frame .
The only way the glass can pop off, is if you spilled some resin on it and the film got fused to it when printing and pulled off the glass. Which is very rare. Make sure the bottom of your film is cleaned and the glass is clean of any resin or residue.
If the glass does pop off, remove the existing tape, clean the glass on both sides, apply tape to the inside of the metal frame and reapply the glass.
https://www.amazon.com/YUYIKES-Adhesive ... 004WIQW3U/
If the glass does pop off, remove the existing tape, clean the glass on both sides, apply tape to the inside of the metal frame and reapply the glass.
https://www.amazon.com/YUYIKES-Adhesive ... 004WIQW3U/
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 5 guests