Page 1 of 1
Glass lifted off frame .
Posted: Tue Sep 18, 2018 9:07 am
by Stanleyloo
Hi user , anyone had this issue ? Glass lifted off frame. Can it just be glued back on with silicon ? Thx in advance .
Re: Glass lifted off frame .
Posted: Tue Sep 18, 2018 2:50 pm
by mongerdesigns
The glass is removable for easy cleaning and replacement of it breaks. Shouldn’t come out by itself though. Use double sided lcd tape. 2mm. Sold on Amazon.
Re: Glass lifted off frame .
Posted: Wed Sep 19, 2018 2:44 am
by Jewelermdt
Does it get hot where your printer is? Do you have a fan to blow the heat from projector away from printer? Heat is most likely the cause of the tape failing. BTDT
Re: Glass lifted off frame .
Posted: Wed Sep 19, 2018 5:36 pm
by mongerdesigns
The only way the glass can pop off, is if you spilled some resin on it and the film got fused to it when printing and pulled off the glass. Which is very rare. Make sure the bottom of your film is cleaned and the glass is clean of any resin or residue.
If the glass does pop off, remove the existing tape, clean the glass on both sides, apply tape to the inside of the metal frame and reapply the glass.
https://www.amazon.com/YUYIKES-Adhesive ... 004WIQW3U/