Intel HD Graphic 520's Full RGB problem

Topics about Solus 3d Printer's hardware
samatheang
Solus Expert
Posts:197
Joined:Wed Feb 17, 2016 10:36 pm
Intel HD Graphic 520's Full RGB problem

Postby samatheang » Tue Jan 24, 2017 10:32 pm

Hi, does anyone here using Intel HD Graphic 520. I have seen some people using it without problem. Not sure why even I turned on full RGB and set refresh rate to 60p, I still get background curing problem. I have updated the driver to the latest version. Any help would be much appreciated. Thank you.
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Intel HD Graphic 520's Full RGB problem

Postby mongerdesigns » Tue Jan 24, 2017 11:18 pm

Have you done the full rgb check? Put a piece of paper on the quartz and observe the background intensity. Then unplug the HDMI cable from the back of the projector while looking at the projection. If the background intensity gets dimmer then the full rgb is not set. If it stays the same then it's set.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
samatheang
Solus Expert
Posts:197
Joined:Wed Feb 17, 2016 10:36 pm

Re: Intel HD Graphic 520's Full RGB problem

Postby samatheang » Wed Jan 25, 2017 2:56 am

I have checked already, Emil. The background intensity gets dimmer after unplug the HDMI cable, so that means the full rgb is not set, but I double checked again and again, it is already set to full rgb in the intel graphics property though. Do you have any idea on how to fix it please? Thank you.

mongerdesigns wrote:Have you done the full rgb check? Put a piece of paper on the quartz and observe the background intensity. Then unplug the HDMI cable from the back of the projector while looking at the projection. If the background intensity gets dimmer then the full rgb is not set. If it stays the same then it's set.
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Intel HD Graphic 520's Full RGB problem

Postby mongerdesigns » Wed Jan 25, 2017 3:42 am

Sam. Try to remove the driver (uninstall it) and then download the new driver from the Intel website https://downloadcenter.intel.com/downlo ... duct=88355
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
samatheang
Solus Expert
Posts:197
Joined:Wed Feb 17, 2016 10:36 pm

Re: Intel HD Graphic 520's Full RGB problem

Postby samatheang » Wed Jan 25, 2017 8:14 am

That's where I got the driver from for updating the laptop's driver, but I installed it as update. Now I will try to remove and reinstall the driver again. Will let you know. Thank you, Emil.

mongerdesigns wrote:Sam. Try to remove the driver (uninstall it) and then download the new driver from the Intel website https://downloadcenter.intel.com/downlo ... duct=88355
samatheang
Solus Expert
Posts:197
Joined:Wed Feb 17, 2016 10:36 pm

Re: Intel HD Graphic 520's Full RGB problem

Postby samatheang » Fri Jan 27, 2017 9:30 am

Thank you very much, Emil. Removing the driver first, then reinstalling it solved the full RGB problem. :)

mongerdesigns wrote:Sam. Try to remove the driver (uninstall it) and then download the new driver from the Intel website https://downloadcenter.intel.com/downlo ... duct=88355

Who is online

Users browsing this forum: No registered users and 92 guests