(SOLVED)NVIDIA RGB ISSUE
-
- Solus Expert
- Posts:197
- Joined:Wed Feb 17, 2016 10:36 pm
Yes, Emil is right. It looks like the UV filter hasn't removed too. Totally forgot about that.
Re: NVIDIA RGB ISSUE
Thanks for help..yes i removed the uv filter...i do the test without the supports...and i have the same...i will check another time the projector settings : in the panel settings user in white balance have you R 100 G 100 B 100 ?
Thanks...
Thanks...
Re: NVIDIA RGB ISSUE
Jewelermdt wrote:That does not look like the Nvida Control panel. Right click on you screen and see if the Nvida properties tab comes up.
My control panel looks like that, except it is in English instead of French.
Re: NVIDIA RGB ISSUE
hi Friends!
I double check my projector settings just precisions : have you in settings of projector image /advanced/white balance/ these values : R gain 100 // G gain 100 // B gain 100 ??
and i notice that the projector was not, in the color space menu on RGB but in AUTO ....does i switch to RGB ?
Thanks for help...
I double check my projector settings just precisions : have you in settings of projector image /advanced/white balance/ these values : R gain 100 // G gain 100 // B gain 100 ??
and i notice that the projector was not, in the color space menu on RGB but in AUTO ....does i switch to RGB ?
Thanks for help...
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: NVIDIA RGB ISSUE
Set it to RGB
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: NVIDIA RGB ISSUE
Who did you purchase your machine from? Please contact them directly for help.
I'm positive something is not setup correctly with your projector? RGB gain? Where did you see that you need to adjust that in the instructions?
I'm positive something is not setup correctly with your projector? RGB gain? Where did you see that you need to adjust that in the instructions?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: NVIDIA RGB ISSUE
..I bought it in MIAMI ..new in box..but like i told you by mail since i reset the parameters of the projectors it seems to be better...I recalibrate the build plate these evening and give you some news..I've reinstall SC because it was impossible to move the project grid with X and Y... positive is that the bad slice preview is fixed as i reset the projector settings.Cross the fingers
- JesseTaylor
- Novice
- Posts:24
- Joined:Wed Apr 27, 2016 1:51 am
Re: NVIDIA RGB ISSUE
Have you looked at these settings? Also have you removed the UV filter from your projector?
Who is online
Users browsing this forum: No registered users and 95 guests