Hi guys,
I ask few weeks back if the support stay if you save as .solus, and the answer was yes and i'm agree with that but the setting of them don't follow.
For example on my main computer I set the touch point at 0.6 for a job and save it, but when I open the job on the Solus computer the touch point generate at the defaut size 0.3.
Is it normal?
Support bug
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Support bug
Which version? Update to the latest beta.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Support bug
I have the same problem.
Latest beta version
Latest beta version
Re: Support bug
I only work on stable version 1.3
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Support bug
download the latest version 1.3.12 and see if that helps.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Support bug
I have exactly the same problem. Running the latest version on both machines.
- nzfinescale
- Novice
- Posts:61
- Joined:Fri Apr 22, 2016 5:13 am
Re: Support bug
Same problem for me.
You can work around by:
# loading the scene (supports will be default and likely wrong for you).
# Change the support settings to what you want.
# Delete everything
# Reload the scene - which will use the right settings.
Only some of the settings seem to go back to default. Lift height, base size certainly do.
I use 2 PCs. One for set up, one for print and this happens every time, so I'm used to working around it. There are a few other things that make support settings change back to default. I haven't recorded these - but the fix is the same.
Lawrence
You can work around by:
# loading the scene (supports will be default and likely wrong for you).
# Change the support settings to what you want.
# Delete everything
# Reload the scene - which will use the right settings.
Only some of the settings seem to go back to default. Lift height, base size certainly do.
I use 2 PCs. One for set up, one for print and this happens every time, so I'm used to working around it. There are a few other things that make support settings change back to default. I haven't recorded these - but the fix is the same.
Lawrence
Who is online
Users browsing this forum: No registered users and 7 guests