Printing at 42

[printcast]

My prints at 25 are great. Very happy with those. When I move to 42 the prints fail. I use B9 green and the Solus stock settings for it. Should I modify those settings when printing at 42?

Thank you
Jim

[Jewelermdt]

You should only have to change your setting in Contour to 42xy. Be sure to change your lens. Calibrate / focus the grid as you did with 25xy.

[mongerdesigns]

If everything is setup correctly and you're getting a failed print, try increasing the exposure time.

[printcast]

Thank you.

Yes, lens was changed all was set and focused. I'll try to up exposure the next time.