Print Failures since Contour 1.4 upgrade

samatheang
Solus Expert
Posts:197
Joined:Wed Feb 17, 2016 10:36 pm
Re: Print Failures since Contour 1.4 upgrade

Postby samatheang » Fri Apr 14, 2017 6:01 pm

You have to connect it to a source like your laptop to be able to adjust brightness, contrast, etc.
User avatar
GAR62
Novice
Posts:30
Joined:Sun Aug 30, 2015 3:23 pm
Location:Red Bluff, CA
Contact:

Re: Print Failures since Contour 1.4 upgrade

Postby GAR62 » Fri Apr 14, 2017 7:17 pm

Okay my bad, I didn't have the computer turned on. Everything checks out okay then on the settings.
User avatar
GAR62
Novice
Posts:30
Joined:Sun Aug 30, 2015 3:23 pm
Location:Red Bluff, CA
Contact:

Re: Print Failures since Contour 1.4 upgrade

Postby GAR62 » Fri Apr 14, 2017 9:21 pm

i set the projector back up with the Solus. All projector settings are correct, RGB Full and still showing dim light on project black and when print starts.
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Print Failures since Contour 1.4 upgrade

Postby mongerdesigns » Fri Apr 14, 2017 10:31 pm

The dim light is normal. It will never just project pure black. We just don't want bright light when it's not projecting anything.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
GAR62
Novice
Posts:30
Joined:Sun Aug 30, 2015 3:23 pm
Location:Red Bluff, CA
Contact:

Re: Print Failures since Contour 1.4 upgrade

Postby GAR62 » Fri Apr 14, 2017 11:03 pm

Okay, I'll try another actual grow tomorrow, Thanks Emil
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Print Failures since Contour 1.4 upgrade

Postby mongerdesigns » Fri Apr 14, 2017 11:45 pm

Please clean the glass and the lenses with a lens cleaner pad, or some alcohol and microfiber cloth. Just to make sure you don't have any residue on there that can scatter light.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 6 guests