homing cycle doesn't work again
Same problem as last week. Went to print and nothing. Tried again on the old program, nothing. Do you have write up on how to fix this. Don't really want to bother you folks again. Thanks, Robert Hood
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: homing cycle doesn't work again
Unplug the usb cable, plug it back in. Restart Contour and try again. Try changing the USB port on your pc. Might be a faulty one.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: homing cycle doesn't work again
Thanks. Did all that without success. Took the battery out of the laptop and rebooted. Works now. Not sure which worked but much obliged for the quick response. Maybe it was a moment of clarity in my senile dementia! Cheers!
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: homing cycle doesn't work again
Make sure your USB ports are set to never turn off, go idle in device manager.
Always have laptop set to never go idle, sleep, hibernate.
Always have laptop set to never go idle, sleep, hibernate.
Re: homing cycle doesn't work again
Having this problem too, even with creation workshop. Was fine before I updated to ver 1.6 on contour.
Re: homing cycle doesn't work again
I can get it to home, but its dead right after. Have to keep replugging the usb. Yes, I've disabled ability to turn off power to usb ports.
Is there a download link for 1.4?
Is there a download link for 1.4?
Re: homing cycle doesn't work again
Suddenly working.....
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: homing cycle doesn't work again
The culprit can be your computer's USB port. Try a different port to troubleshoot. Maybe even a different laptop if you have one, just to test.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: homing cycle doesn't work again
It was the same behavior on all the ports. I'll secure back up computer just in case. cheers
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: homing cycle doesn't work again
Make sure all plugs are in tight. Maybe try a different cable.
Who is online
Users browsing this forum: No registered users and 79 guests