It was printed in 8 plates.
Each plate contains 6-7 rings and takes 3.30 hours for printing. With a half hour rest for solus
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
All in 32 hours. Most of rings were designed with 0.25 mm parts.
I had also about 5 fail rings.
I'm using solus for continues order set of rings so i thought some people needs to know if they can use it for these kind of works.
My opinion is: Its Great
![Wink ;)](./images/smilies/icon_e_wink.gif)