very small wire wheels

Show off your prints.
User avatar
nzfinescale
Novice
Posts:61
Joined:Fri Apr 22, 2016 5:13 am
very small wire wheels

Postby nzfinescale » Fri Apr 06, 2018 8:03 am

Austin_HLB5178.jpg


Here's my latest model at 25/25micron with 20micron layers printed in Proto.

The car wheelbase is 32mm and the spokes are drawn at 0.1mm. However the wheels were over exposed to get a reasonable success rate so they will be somewhat fatter than that. The steering wheel is also ridiculously fine.

You can read more about this here:

https://nzfinescale.com/small-motor-cars/

Otherwise, here are a few more images:
Austin_HLB5174.jpg


austin_HLB5176.jpg


Lawrence
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: very small wire wheels

Postby M-Williams » Fri Apr 06, 2018 8:24 pm

Astonishing Work!!!!!!!!!!!!!!!!
drakon
Posts:3
Joined:Thu Nov 24, 2016 7:52 am

Re: very small wire wheels

Postby drakon » Tue Apr 10, 2018 4:21 am

Awesome!
I just read through your blog as well!
Brilliant job on the wheels! Are you printing them at an angle or horizontal to the build plate?
User avatar
nzfinescale
Novice
Posts:61
Joined:Fri Apr 22, 2016 5:13 am

Re: very small wire wheels

Postby nzfinescale » Tue Apr 10, 2018 10:35 am

The wheels are printed vertically as you see them with no support. I generally put 0.1-0.2mm of -ve Z on them. This creates a small flat on the bottom which kind of simulates weight on the tyres.

I've been working on mk2 of this model which I'll share in due course.

Thanks for the feedback

Lawrence

Who is online

Users browsing this forum: No registered users and 3 guests