Prints by Tiger

Show off your prints.
User avatar
Tiger
Novice
Posts:26
Joined:Tue Dec 15, 2015 6:57 pm
Location:Belgium
Re: Prints by Tiger

Postby Tiger » Wed Mar 02, 2016 10:24 am

I did some test with the 42XY configuration, this piece didn't need support.
The client still want a bigger piece, so I'm actually printing 2 separate pieces and will post the image later
Attachments
Dia.JPG
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: Prints by Tiger

Postby Archerm » Wed Mar 02, 2016 4:30 pm

Nice that is w big piece!! You could print it larger in pieces!! :mrgreen:
User avatar
Tiger
Novice
Posts:26
Joined:Tue Dec 15, 2015 6:57 pm
Location:Belgium

Re: Prints by Tiger

Postby Tiger » Wed Mar 02, 2016 5:10 pm

Just finished the second piece, 10 hours printing time, length is 10cm!
I need a Solus+ ;)
Attachments
Dia-big.JPG
User avatar
Tiger
Novice
Posts:26
Joined:Tue Dec 15, 2015 6:57 pm
Location:Belgium

Re: Prints by Tiger

Postby Tiger » Sat Aug 27, 2016 2:26 pm

I resolve all my problems with the new software Solus Contour.
I run a laptop with windows 10 and had a lot of trouble connecting to the COM4 port, it needed 15 to 40 click to connect the printer and sometimes couldn't even connect.
With Solus Contour, it's a one click operation.
I had lines during the printing process, sometimes at the bottom, sometimes in the middle of the piece and it was very difficult to find a reason.
Now it print very smoothly, small supports are only 0,3mm touching the ring and 0,5 at the base.
Thanks to Mark for all the mails and congratulation for the hard work to improve the printer, it's a fantastic little machine ;)
Attached is a model I made for a client, I had to copy a silver ring and cast it in gold.
This ring will be printed in 2 parts so I can clean it easily, the picture is the prototype to show to the client.

André.
Attachments
modele solus contour.jpg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Prints by Tiger

Postby mongerdesigns » Sat Aug 27, 2016 2:52 pm

That looks great, Andre! :shock:
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
exedebee
Solus Expert
Posts:128
Joined:Fri Feb 12, 2016 3:39 am

Re: Prints by Tiger

Postby exedebee » Sat Aug 27, 2016 5:58 pm

Very Smoot.. :o :o
nillard
Novice
Posts:46
Joined:Fri Jun 10, 2016 9:58 pm

Re: Prints by Tiger

Postby nillard » Mon Aug 29, 2016 2:22 am

What did you do to make the prints better?
User avatar
Tiger
Novice
Posts:26
Joined:Tue Dec 15, 2015 6:57 pm
Location:Belgium

Re: Prints by Tiger

Postby Tiger » Mon Aug 29, 2016 8:34 am

Hi Nillard,

For me, the new software was the only changement. It resolves all the troubles :)
User avatar
toddmichael
Novice
Posts:77
Joined:Sun Jul 05, 2015 4:33 am
Location:Motor City, Mi

Re: Prints by Tiger

Postby toddmichael » Mon Sep 05, 2016 5:21 pm

This is printed on the new software?

Toddmichael
Toddmichael
Firestorm Cad / Jeweler / Designer
studiojoia
Novice
Posts:96
Joined:Mon Mar 28, 2016 8:05 am

Re: Prints by Tiger

Postby studiojoia » Wed Sep 07, 2016 9:37 am

Amazing prints!

Who is online

Users browsing this forum: No registered users and 9 guests