I did some test with the 42XY configuration, this piece didn't need support.
The client still want a bigger piece, so I'm actually printing 2 separate pieces and will post the image later
Prints by Tiger
Re: Prints by Tiger
Nice that is w big piece!! You could print it larger in pieces!!
Re: Prints by Tiger
Just finished the second piece, 10 hours printing time, length is 10cm!
I need a Solus+
I need a Solus+
Re: Prints by Tiger
I resolve all my problems with the new software Solus Contour.
I run a laptop with windows 10 and had a lot of trouble connecting to the COM4 port, it needed 15 to 40 click to connect the printer and sometimes couldn't even connect.
With Solus Contour, it's a one click operation.
I had lines during the printing process, sometimes at the bottom, sometimes in the middle of the piece and it was very difficult to find a reason.
Now it print very smoothly, small supports are only 0,3mm touching the ring and 0,5 at the base.
Thanks to Mark for all the mails and congratulation for the hard work to improve the printer, it's a fantastic little machine
Attached is a model I made for a client, I had to copy a silver ring and cast it in gold.
This ring will be printed in 2 parts so I can clean it easily, the picture is the prototype to show to the client.
André.
I run a laptop with windows 10 and had a lot of trouble connecting to the COM4 port, it needed 15 to 40 click to connect the printer and sometimes couldn't even connect.
With Solus Contour, it's a one click operation.
I had lines during the printing process, sometimes at the bottom, sometimes in the middle of the piece and it was very difficult to find a reason.
Now it print very smoothly, small supports are only 0,3mm touching the ring and 0,5 at the base.
Thanks to Mark for all the mails and congratulation for the hard work to improve the printer, it's a fantastic little machine
Attached is a model I made for a client, I had to copy a silver ring and cast it in gold.
This ring will be printed in 2 parts so I can clean it easily, the picture is the prototype to show to the client.
André.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Tiger
That looks great, Andre!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Prints by Tiger
Very Smoot..
Re: Prints by Tiger
What did you do to make the prints better?
Re: Prints by Tiger
Hi Nillard,
For me, the new software was the only changement. It resolves all the troubles
For me, the new software was the only changement. It resolves all the troubles
- toddmichael
- Novice
- Posts:77
- Joined:Sun Jul 05, 2015 4:33 am
- Location:Motor City, Mi
Re: Prints by Tiger
This is printed on the new software?
Toddmichael
Toddmichael
Toddmichael
Firestorm Cad / Jeweler / Designer
Firestorm Cad / Jeweler / Designer
-
- Novice
- Posts:96
- Joined:Mon Mar 28, 2016 8:05 am
Re: Prints by Tiger
Amazing prints!
Who is online
Users browsing this forum: No registered users and 7 guests