Small Feather
Sorry the pictures are not fantastic. This was just to see how small the individual lines on the feather could be and still have them turn out. Not a bad little machine.
I really don't have any dogs. But the insatiable urge to fit in has caused me to do a dog avatar!
Re: Small Feather
Very neat print!! Switch to the Emerald when you get a chance it is fantastic.
Re: Small Feather
I am excited to try the emerald. But i bought $700 worth of black and cherry before Thanksgiving and need to get through my last bottle of cherry before i grab some emerald.
I really don't have any dogs. But the insatiable urge to fit in has caused me to do a dog avatar!
Re: Small Feather
Cool!
Have you tried the black on the Solus? Any idea of the exposure times?
Have you tried the black on the Solus? Any idea of the exposure times?
Re: Small Feather
I haven't tried it yet. My B9 has been demoted to only black with low resolution for times when the customer wants to see a model quickly.
If you knew a starting point with the black i would be happy to do some tweaking and experimenting.
If you knew a starting point with the black i would be happy to do some tweaking and experimenting.
I really don't have any dogs. But the insatiable urge to fit in has caused me to do a dog avatar!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Small Feather
For 30micron Z and 25xy, try about 2000 for the exposure, 12000 for the base exposure and see how that works. Decrease it a little if you get overexposure, or increase it a little if you get partial fails.
Don't forget to make a copy of a profile file, or copy over the g-codes from the default profile if you're gonna make a new profile from inside CW.
Don't forget to make a copy of a profile file, or copy over the g-codes from the default profile if you're gonna make a new profile from inside CW.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Small Feather
How wide are the lines on the feather?
Re: Small Feather
reify wrote:How wide are the lines on the feather?
They average .15mm
I really don't have any dogs. But the insatiable urge to fit in has caused me to do a dog avatar!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Small Feather
Impressive print Darrin. 150 micron lines. That's not bad at all.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 11 guests