CoolMoon's First print!

coolmoon · Postby **coolmoon** » Sun Apr 17, 2016 5:44 pm

I know it doesn't seem like much, the big thing is I did it myself! I didn't have to send it off.

emerald resin
cluster bezel earrings for 3.2 mm round stones
37 minutes to print
25 XY

Postby **reify** » Sun Apr 17, 2016 9:14 pm

Congrats!

Postby **mongerdesigns** » Mon Apr 18, 2016 12:33 am

Looks great!

M-Williams · Postby **M-Williams** » Mon Apr 18, 2016 1:47 am

Great prints. now you can print at the comfort of your shop.

coolmoon · Postby **coolmoon** » Mon Apr 18, 2016 2:02 am

Agreed ! FYI, I'll be casting a pair in 18 karat yellow, using satin cast 20 and I will post results all the way to finished product. Let's see what happens! 8-)

coolmoon · Postby **coolmoon** » Fri Apr 22, 2016 3:16 pm

Hello everyone,

Just wanted to see if it was possible, and it is! Pretty amazing machine! :shock:

Postby **mongerdesigns** » Fri Apr 22, 2016 4:15 pm

This is damn fine work! :shock:

coolmoon · Postby **coolmoon** » Fri Apr 22, 2016 11:36 pm

Thanks!
2.30 hours
30z setting

vivitek1186hd

M-Williams · Postby **M-Williams** » Sat Apr 23, 2016 12:27 am

Superb Work.

coolmoon · Postby **coolmoon** » Thu Apr 28, 2016 2:07 pm

Hello everyone,

Here's a final update on the bezels, there was some investment collapse in the tiny little triangle port holes in the center of the bezels, but not too bad. Overall a good experience. As a side note I used R&R standard investment instead of satin cast 20.

CoolMoon's First print!

Re: CoolMoon's First print!

Re: CoolMoon's First print!

Re: CoolMoon's First print!

Re: CoolMoon's First print!

Re: CoolMoon's First print!

Re: CoolMoon's First print!

Re: CoolMoon's First print!

Re: CoolMoon's First print!

Re: CoolMoon's First print!

Who is online