I know it doesn't seem like much, the big thing is I did it myself! I didn't have to send it off.
emerald resin
cluster bezel earrings for 3.2 mm round stones
37 minutes to print
25 XY
CoolMoon's First print!
Re: CoolMoon's First print!
Congrats!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: CoolMoon's First print!
Looks great!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- M-Williams
- Solus Master
- Posts:393
- Joined:Sun Nov 01, 2015 4:45 pm
Re: CoolMoon's First print!
Great prints. now you can print at the comfort of your shop.
Re: CoolMoon's First print!
Agreed ! FYI, I'll be casting a pair in 18 karat yellow, using satin cast 20 and I will post results all the way to finished product. Let's see what happens!
Re: CoolMoon's First print!
Hello everyone,
Just wanted to see if it was possible, and it is! Pretty amazing machine!
Just wanted to see if it was possible, and it is! Pretty amazing machine!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: CoolMoon's First print!
This is damn fine work!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: CoolMoon's First print!
Thanks!
2.30 hours
30z setting
vivitek1186hd
2.30 hours
30z setting
vivitek1186hd
- M-Williams
- Solus Master
- Posts:393
- Joined:Sun Nov 01, 2015 4:45 pm
Re: CoolMoon's First print!
Superb Work.
Re: CoolMoon's First print!
Hello everyone,
Here's a final update on the bezels, there was some investment collapse in the tiny little triangle port holes in the center of the bezels, but not too bad. Overall a good experience. As a side note I used R&R standard investment instead of satin cast 20.
Here's a final update on the bezels, there was some investment collapse in the tiny little triangle port holes in the center of the bezels, but not too bad. Overall a good experience. As a side note I used R&R standard investment instead of satin cast 20.
Who is online
Users browsing this forum: No registered users and 109 guests