studiojoia wrote:My exposure times are very similar to the Emerald's.
Bottom exposure 13 sec
Layer exposure 2.9 sec
But I have to say that if you want to try this hybrid probably you will need to make adjustments to you exposure, every projector seems to be a bit different.
I adjusted all the exposures on every resin I use, for example my settings for Protosolus are just 4 sec Bottom exposure and 1 sec for the layers.
Prints from Spain
-
- Solus Expert
- Posts:197
- Joined:Wed Feb 17, 2016 10:36 pm
Thank you, studiojoia. I will try that when I get my yellow resin.
-
- Novice
- Posts:96
- Joined:Mon Mar 28, 2016 8:05 am
Re: Prints from Spain
Here are two very good examples of what protosolus can do. Super high resolution for direct mold, amazing.
The skull rings are designed by Nacho Riesco, on the right you can see the ring injected in wax after the mold was done.
In the other example the original and the casted model after the mold and injection.
The skull rings are designed by Nacho Riesco, on the right you can see the ring injected in wax after the mold was done.
In the other example the original and the casted model after the mold and injection.
-
- Novice
- Posts:96
- Joined:Mon Mar 28, 2016 8:05 am
Re: Prints from Spain
And here is one ring in withe gold, emerald and diamonds ready to deliver
Re: Prints from Spain
Fantastic as always.
Can you ask Nacho what kind of silicone he uses to make the molds?
http://reify-3d.com/forum/viewtopic.php?f=8&p=3128#p3108
Can you ask Nacho what kind of silicone he uses to make the molds?
http://reify-3d.com/forum/viewtopic.php?f=8&p=3128#p3108
-
- Novice
- Posts:96
- Joined:Mon Mar 28, 2016 8:05 am
Re: Prints from Spain
They use 2 componets cold silicone, Alearte has his own formula, but any silicone should work just fine (castaldo for example), just put some talc on the model before to prevent it from sticking to the silicone, thats it.
I know many people using this method always with sucess.
I know many people using this method always with sucess.
Re: Prints from Spain
The Virgin Mary print is so smooth yet detailed...printed at 10Z?
-
- Novice
- Posts:96
- Joined:Mon Mar 28, 2016 8:05 am
Re: Prints from Spain
It'a been I while since my last post, here are some pictures to catch up.
-
- Novice
- Posts:96
- Joined:Mon Mar 28, 2016 8:05 am
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints from Spain
Excellent prints and photos Jordi!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:96
- Joined:Mon Mar 28, 2016 8:05 am
Re: Prints from Spain
Thanks Emil. I'm glad you like it
Who is online
Users browsing this forum: No registered users and 13 guests