A 48 rings tree in 42 microns.
It was printed in 8 plates.
Each plate contains 6-7 rings and takes 3.30 hours for printing. With a half hour rest for solus
All in 32 hours. Most of rings were designed with 0.25 mm parts.
I had also about 5 fail rings.
I'm using solus for continues order set of rings so i thought some people needs to know if they can use it for these kind of works.
My opinion is: Its Great
Autumn Tree
Re: Autumn Tree
That looks like a pain to sprue.
I am looking forward to seeing the metal version of that tree!
I am looking forward to seeing the metal version of that tree!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Autumn Tree
Wow. That's amazing. Ya. A metal version would be great to see.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Autumn Tree
mongerdesigns wrote:Wow. That's amazing. Ya. A metal version would be great to see.
I casted many of these trees before with no problem.
I hope this comes out well too.
I will post its pics tomorrow
Re: Autumn Tree
mongerdesigns wrote:Wow. That's amazing. Ya. A metal version would be great to see.
rkundla wrote:That looks like a pain to sprue.
I am looking forward to seeing the metal version of that tree!
This is it 18k gold.
Re: Autumn Tree
Incredible!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Autumn Tree
Did you use this investment? http://www.stuller.com/products/22-4748/?groupId=192169
I heard good things about it.
I heard good things about it.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Autumn Tree
mongerdesigns wrote:Did you use this investment? http://www.stuller.com/products/22-4748/?groupId=192169
I heard good things about it.
Yes.
Its really a good investment.
Re: Autumn Tree
I am having a TERRIBLE time trying to cast a 14k WG bracelet. Either chunks of investment remain on the inside
or it seems like the Plasti-Cast breaks down at a point and dosent remain to its form of the bracelet. Its a thick bracelet
All in its 2.5dwt in resin so its a big casting... Think this investment will help? Here's a pic from todays 3rd casting that didnt work.
EVERYTHING else I do is perfect.
This link has a 360 pic! https://spinzam.com/shot/?idx=3520
https://spinzam.com/shot/?idx=3520
or it seems like the Plasti-Cast breaks down at a point and dosent remain to its form of the bracelet. Its a thick bracelet
All in its 2.5dwt in resin so its a big casting... Think this investment will help? Here's a pic from todays 3rd casting that didnt work.
EVERYTHING else I do is perfect.
This link has a 360 pic! https://spinzam.com/shot/?idx=3520
https://spinzam.com/shot/?idx=3520
M.A.N wrote:mongerdesigns wrote:Did you use this investment? http://www.stuller.com/products/22-4748/?groupId=192169
I heard good things about it.
Yes.
Its really a good investment.
Re: Autumn Tree
Does it require any special steps or does it behave like Kerr SatinCast?
What burnout program did you use to get those results?
Normally I wouldn't buy that kind of stuff from Stuller, but when my box of PlastiCast runs out, I'd consider giving it a try.
What burnout program did you use to get those results?
Normally I wouldn't buy that kind of stuff from Stuller, but when my box of PlastiCast runs out, I'd consider giving it a try.
Who is online
Users browsing this forum: No registered users and 13 guests