Just getting started

Show off your prints.
Post Reply
Joseph
Novice
Posts:20
Joined:Tue Sep 01, 2015 12:00 am
Just getting started

Postby Joseph » Wed Sep 09, 2015 10:58 pm

Nice to be able to print any model and not have to worry about how to mill.
Attachments
IMG_1890.JPG
IMG_1853.JPG
IMG_1851.JPG
Top
User avatar
ken3dcad
Novice
Posts:37
Joined:Fri Jul 03, 2015 12:44 pm
Location:Central Texas
Contact:
Contact ken3dcad

Re: Just getting started

Postby ken3dcad » Thu Sep 10, 2015 1:40 am

Awesome prints, Joe! :D
Top
Joseph
Novice
Posts:20
Joined:Tue Sep 01, 2015 12:00 am

Re: Just getting started

Postby Joseph » Thu Sep 10, 2015 2:30 am

Thanks Ken :D
Top
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:
Contact mongerdesigns

Re: Just getting started

Postby mongerdesigns » Thu Sep 10, 2015 3:10 am

Those prints look super clean, Joe! :o

Keep them coming. Great work.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Top
Joseph
Novice
Posts:20
Joined:Tue Sep 01, 2015 12:00 am

Re: Just getting started

Postby Joseph » Thu Sep 10, 2015 3:41 am

Thanks monger designs. 8-)
Top
Joseph
Novice
Posts:20
Joined:Tue Sep 01, 2015 12:00 am

Re: Just getting started

Postby Joseph » Sat Sep 12, 2015 7:21 pm

Being third party, don't always get the right info so reprint this time its going to be casted in two colors not one. :roll:
Attachments
IMG_1902.JPG
IMG_1900.JPG
IMG_1901.JPG
Top
Joseph
Novice
Posts:20
Joined:Tue Sep 01, 2015 12:00 am

Re: Just getting started

Postby Joseph » Mon Sep 14, 2015 9:48 pm

future prints making a note for more supports in thin area. Could not figure out what went wrong until I looked and saw that the area that was hollowed out in the shank is to thin. Live and learn.
Attachments
IMG_1910.JPG
IMG_1912.JPG
Top
Joseph
Novice
Posts:20
Joined:Tue Sep 01, 2015 12:00 am

Re: Just getting started

Postby Joseph » Wed Sep 16, 2015 3:45 am

IMG_1926.JPG
Casted and finished piece. Nice machine and set up Mongerdesigns.
Attachments
IMG_1927.JPG
IMG_1918.JPG
IMG_1919.JPG
Top
User avatar
reify
Site Admin
Posts:571
Joined:Mon Mar 16, 2015 6:10 pm

Re: Just getting started

Postby reify » Wed Sep 16, 2015 8:29 am

Beautiful work Joe. It's always great to see the final product.
Top
Joseph
Novice
Posts:20
Joined:Tue Sep 01, 2015 12:00 am

Re: Just getting started

Postby Joseph » Thu Sep 17, 2015 4:01 pm

Thanks Reify.

I check to see why my print did not print and after checking I forgot to tapper the inside ring that I used to Boolean different with. It came out to .2mm and it was at the start of the failed print. Live and learn.
Top
Post Reply

Return to “Gallery”

Who is online

Users browsing this forum: No registered users and 117 guests