Jungle Queen by Hector Moran

Show off your prints.
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:
Jungle Queen by Hector Moran

Postby mongerdesigns » Tue Mar 21, 2017 11:43 pm

This is a cool new project by Hector Moran called Jungle Queen. It's a 54mm tall figure. The entire composition including the rocks is about 75mm tall.

Hector asked me to print it on the Solus to show off it's capabilities. The support tips used were 0.1mm so it was very easy to remove and the surfaces are very clean and need very minor post cleanup to remove the tiny support bumps.

Stay tuned for the assembled piece, then casted out of resin and painted.

2017-03-21-16.27.13 ZS PMax.jpg
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
exedebee
Solus Expert
Posts:128
Joined:Fri Feb 12, 2016 3:39 am

Re: Jungle Queen by Hector Moran

Postby exedebee » Wed Mar 22, 2017 2:16 am

Beautiful ;)
User avatar
Eoin Rogan
Novice
Posts:23
Joined:Thu May 05, 2016 11:23 am

Re: Jungle Queen by Hector Moran

Postby Eoin Rogan » Mon May 22, 2017 1:52 pm

That's really nice work. I gotta try .1mm attachments now too. Though I find the .2mm attachments can almost be rubbed away without leaving a trace.
Weliz
Novice
Posts:22
Joined:Wed Sep 14, 2016 2:01 pm

Re: Jungle Queen by Hector Moran

Postby Weliz » Wed May 24, 2017 9:05 am

Cant wait to see the assembled peace. :D

Who is online

Users browsing this forum: No registered users and 6 guests