Hi guys, wanted to share some of my first miniature prints,
I am happy with the quality but do you guys know any way to increase it a bit more ? I do want to get more details around the eyes :/ and so on. Any tips would be appreciated !
download/file.php?mode=view&id=2411
Miniature prints.
Re: Miniature prints.
Nice printing/How many micron you printing?
Exe
Exe
Re: Miniature prints.
hi,
Thank you exedebee,
it was 30 (layer thikness) microns with a 48x27x80mm with 1 second exposure time. (i have tried 2 second but i see no difference ) i read in another thered that you can lower precision to 20 microns and it should work as well (i think I will try that at some point).
Thank you exedebee,
it was 30 (layer thikness) microns with a 48x27x80mm with 1 second exposure time. (i have tried 2 second but i see no difference ) i read in another thered that you can lower precision to 20 microns and it should work as well (i think I will try that at some point).
Re: Miniature prints.
wow very awesome
is that solus proto you are using?
print on 42xy 30z 1second exposure?
is that solus proto you are using?
print on 42xy 30z 1second exposure?
Re: Miniature prints.
Waever: Thank you man and yes, you right I'm trying different resolutions and it feels like I'm getting better results
next print:
next print:
Re: Miniature prints.
Very nice.
You can even see the veins popping out of those arms.
You can even see the veins popping out of those arms.
Re: Miniature prints.
Thanks eg123, i should probable show the original sculpt, there is a lot more details i would love to see pop up but I'm not sure if i will be able to make it work :/
Re: Miniature prints.
Arek_mat wrote:Waever: Thank you man and yes, you right I'm trying different resolutions and it feels like I'm getting better results
next print:
print_test_2.jpg
do you notice the thick print lines at the chest area?
because i dont see it from the original sculpt.
i am having those lines problem
viewtopic.php?f=11&t=944
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Miniature prints.
That can happen if the model is solid inside and now hollowed out with an exit hole on the bottom.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Miniature prints.
mongerdesigns wrote:That can happen if the model is solid inside and now hollowed out with an exit hole on the bottom.
Yes, but from the problem my thread i did hollow my model to only 1mm thickness.
We'll see how it ends up after i tinkering with the print parameter.
Who is online
Users browsing this forum: No registered users and 43 guests