Miniature prints.

Show off your prints.
Arek_mat
Posts:5
Joined:Sun Jul 09, 2017 12:02 pm
Miniature prints.

Postby Arek_mat » Sun Jul 09, 2017 12:10 pm

Hi guys, wanted to share some of my first miniature prints,
I am happy with the quality but do you guys know any way to increase it a bit more ? I do want to get more details around the eyes :/ and so on. Any tips would be appreciated !

download/file.php?mode=view&id=2411
Attachments
test_druk_1.jpg
User avatar
exedebee
Solus Expert
Posts:128
Joined:Fri Feb 12, 2016 3:39 am

Re: Miniature prints.

Postby exedebee » Mon Jul 10, 2017 12:58 am

Nice printing/How many micron you printing?
Exe
Arek_mat
Posts:5
Joined:Sun Jul 09, 2017 12:02 pm

Re: Miniature prints.

Postby Arek_mat » Mon Jul 10, 2017 8:30 am

hi,
Thank you exedebee,
it was 30 (layer thikness) microns with a 48x27x80mm with 1 second exposure time. (i have tried 2 second but i see no difference ) i read in another thered that you can lower precision to 20 microns and it should work as well (i think I will try that at some point).
Waever
Novice
Posts:83
Joined:Sat Apr 23, 2016 10:34 am

Re: Miniature prints.

Postby Waever » Fri Jul 14, 2017 2:49 pm

wow very awesome

is that solus proto you are using?
print on 42xy 30z 1second exposure?
Arek_mat
Posts:5
Joined:Sun Jul 09, 2017 12:02 pm

Re: Miniature prints.

Postby Arek_mat » Sat Jul 29, 2017 10:28 am

Waever: Thank you man :D and yes, you right I'm trying different resolutions and it feels like I'm getting better results :-)

next print:
print_test_2.jpg
eg123
Novice
Posts:74
Joined:Mon May 23, 2016 6:55 pm
Location:Silver Spring, Maryland

Re: Miniature prints.

Postby eg123 » Sat Jul 29, 2017 12:52 pm

Very nice.
You can even see the veins popping out of those arms.
Arek_mat
Posts:5
Joined:Sun Jul 09, 2017 12:02 pm

Re: Miniature prints.

Postby Arek_mat » Sat Jul 29, 2017 2:42 pm

Thanks eg123, i should probable show the original sculpt, there is a lot more details i would love to see pop up but I'm not sure if i will be able to make it work :/
screen1.jpg
Waever
Novice
Posts:83
Joined:Sat Apr 23, 2016 10:34 am

Re: Miniature prints.

Postby Waever » Wed Aug 09, 2017 1:28 pm

Arek_mat wrote:Waever: Thank you man :D and yes, you right I'm trying different resolutions and it feels like I'm getting better results :-)

next print:
print_test_2.jpg


do you notice the thick print lines at the chest area?
because i dont see it from the original sculpt.
i am having those lines problem
viewtopic.php?f=11&t=944
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Miniature prints.

Postby mongerdesigns » Wed Aug 09, 2017 3:49 pm

That can happen if the model is solid inside and now hollowed out with an exit hole on the bottom.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Waever
Novice
Posts:83
Joined:Sat Apr 23, 2016 10:34 am

Re: Miniature prints.

Postby Waever » Wed Aug 09, 2017 7:35 pm

mongerdesigns wrote:That can happen if the model is solid inside and now hollowed out with an exit hole on the bottom.


Yes, but from the problem my thread i did hollow my model to only 1mm thickness.
We'll see how it ends up after i tinkering with the print parameter.

Who is online

Users browsing this forum: No registered users and 13 guests