Prints by Monger
Looks like B9 creator for the supports.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Prints by Monger
Very nice!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Removed the supports and took a few photos of this incredible dragon ring by Nacho Riesco.
No. It's not a rendering
No. It's not a rendering
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Prints by Monger
That is a cool design. Liking the emerald resin.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Octopus Ring by Florian.
Florian (Flo from the 3dcadjewelry forum) asked me to print this a long time ago, and I finally got around to it. Mostly because of the immense amount of supports it needed. Not just many supports, but I wanted to put them very carefully to minimize the damage to the details. The octopus didn't make it easy because it has overhangs on every side no matter how you turn it Anyway, I think it turned out pretty good.
Florian (Flo from the 3dcadjewelry forum) asked me to print this a long time ago, and I finally got around to it. Mostly because of the immense amount of supports it needed. Not just many supports, but I wanted to put them very carefully to minimize the damage to the details. The octopus didn't make it easy because it has overhangs on every side no matter how you turn it Anyway, I think it turned out pretty good.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Prints by Monger
Wow! Sharp print and nice design!
-
- Novice
- Posts:33
- Joined:Fri Dec 11, 2015 5:03 am
Re: Prints by Monger
hey Monger, is it possible to put a picture of the design supported. as I am just learning seeing items with the supports can really help me visually see what you all are talking about.
-
- Novice
- Posts:33
- Joined:Fri Dec 11, 2015 5:03 am
Re: Prints by Monger
the dragon is awesome, the work is just great.
thanks for sharing
thanks for sharing
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Chess piece model by Studioqubed. Printed on the Solus 3d printer at 25xy30z resolution. 3hr20m print time.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 9 guests