Prints by Monger
Very cool. Are you going to print the whole set!!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Lol. Not sure.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Prints by Monger
Did you print this with Black B9 resin?
If so, can you share the resin profile for this?
Thanks.
If so, can you share the resin profile for this?
Thanks.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
It's not the b9 black. It's the spot a ht with black pigment added. The profile is already in there.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Prints by Monger
Have you any idea of the CW profile for the Black B9 resin?
Tried it? Starting tips?
Tried it? Starting tips?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Haven't tried it, but it's not too difficult to figure out. Start at a certain exposure, maybe 25% less than cherry. If it's overcured, lower a bit more until the details are sharp and accurate.
Remember when making a new profile in cw, don't forget to copy over the gcodes. An easier way it to go the profiles folder, make a copy of the default profile file, rename it, then open cw, choose the new profile and make changes to the exposures.
Remember when making a new profile in cw, don't forget to copy over the gcodes. An easier way it to go the profiles folder, make a copy of the default profile file, rename it, then open cw, choose the new profile and make changes to the exposures.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Millgrain? no problem. Printed this just yesterday. Minimal supports on the millgrain.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Prints by Monger
Wow on the millgrain! I have a model with millgrain that I will be printing soon.
I figured I was going to have to print it without and add it later when I looked at all the red dots on every single bead using Rhino Gold's support tool.
Now, I might just try to print it as is
May I ask what the size of each bead is? My model has .4mm beads.
Still amazed at how great this printer is!
I figured I was going to have to print it without and add it later when I looked at all the red dots on every single bead using Rhino Gold's support tool.
Now, I might just try to print it as is
May I ask what the size of each bead is? My model has .4mm beads.
Still amazed at how great this printer is!
Re: Prints by Monger
Love the millgrain. I have done guide a few and the millgrain comes out great.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Nacho asked me to printer this Tiger Ring on the Solus. Probably went a little overboard with the supports 25 microns XY and 25 microns Z resolution.
Just a quick video using my phone.
https://www.youtube.com/watch?v=OUyUk7jD2eU
Just a quick video using my phone.
https://www.youtube.com/watch?v=OUyUk7jD2eU
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 52 guests