Page 1 of 2

Ironfonzy's Prints

Posted: Thu Aug 10, 2017 8:20 am
by ironfonzy
Hello Family Solus..
After some lots of problems (projector with bad lamp etc...)here some of my first print before finishing and casting in silver..My rings are the most of the time heavy so need to adjust my supports and i put all the time text inside....I'm very happy with Solus..Thanks Jordi and the team for their supports..

Image
Image
Image
Image

Re: Ironfonzy's Prints

Posted: Thu Aug 10, 2017 3:17 pm
by rsaldivar
those are heavy rings , make sure to anneal before you cast , dont just UV them

Re: Ironfonzy's Prints

Posted: Fri Aug 11, 2017 3:05 pm
by ironfonzy
Thanks ...what to you mean by anneal?

Re: Ironfonzy's Prints

Posted: Fri Aug 11, 2017 3:58 pm
by mongerdesigns
Heat treat. Low temperature oven (150f) for about 1-2 hours.

Re: Ironfonzy's Prints

Posted: Mon Sep 04, 2017 7:10 pm
by ironfonzy
another good print..! :D
Image
Image

Re: Ironfonzy's Prints

Posted: Mon Sep 18, 2017 3:00 pm
by ironfonzy
and some castings...
Image

Re: Ironfonzy's Prints

Posted: Mon Oct 16, 2017 3:38 am
by JesseTaylor
Nice chunky designs...very cool

Re: Ironfonzy's Prints

Posted: Thu Oct 19, 2017 9:00 pm
by ironfonzy
Thanks Jessy..
some new rings from cast and finished..

Image
Image
Image

Re: Ironfonzy's Prints

Posted: Sun Nov 12, 2017 4:14 pm
by ironfonzy
New prints on the bench ;)

Image

Image

Re: Ironfonzy's Prints

Posted: Thu Nov 16, 2017 3:49 pm
by studiojoia
Awesome prints Arnaud :)