NEW SOLUS SOFTWARE?
I had no idea about the ClippingPlane command. thank you, it'll save a bunch of time trying to figure out if I've got everything supported correctly.
Re: NEW SOLUS SOFTWARE?
i dont know what improves in updates but i think Home button need return for calibration, project preview or project full working area are needed, and also check error support like b9 software is useful
Re: NEW SOLUS SOFTWARE?
Kevin wrote:I had no idea about the ClippingPlane command. thank you, it'll save a bunch of time trying to figure out if I've got everything supported correctly.
If you turn on history, run the clipping plane command and then curve from intersection, you get a nice perimeter line too (which works great contrasted on a different layer colour) which auto updates if you nudge the plane up and down in Z. I've set one of my nudge key binds to 0.03mm, which is 30z.
Re: NEW SOLUS SOFTWARE?
reify wrote:We haven't added the micro adjustment function yet so you need to calibrate the build area using the projector zoom.
Is there a projector menu option that has bigger text to use when calibrating? The regular menu display text is so small.
- mongerdesigns
- Solus Guru
- Posts:1951
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: NEW SOLUS SOFTWARE?
I just use the grid to focus. I don't use the projector menu. Just make sure the lines are as sharp as possible.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: NEW SOLUS SOFTWARE?
Thanks. I'm currently getting great results but I noticed when I used the grid the very top corners weren't fully formed into a grid. Is this normal?
- mongerdesigns
- Solus Guru
- Posts:1951
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: NEW SOLUS SOFTWARE?
No. You can adjust that on the Grid Adjustment screen.
Lower the first distortion parameter from the left (the 0.97) to 0.96. That should make the corners show up again.
Don't forget to check your grid size to make sure it's the same 48mm x 27mm. If it shrunk a little, you can use the zoom wheel to make it a little larger.
Lower the first distortion parameter from the left (the 0.97) to 0.96. That should make the corners show up again.
Don't forget to check your grid size to make sure it's the same 48mm x 27mm. If it shrunk a little, you can use the zoom wheel to make it a little larger.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: NEW SOLUS SOFTWARE?
Do You maybe have any news about the support structure plugin for the Contour?
Re: NEW SOLUS SOFTWARE?
can you build 73x41mm print area, i think it more quality at resolution, easy to control, 80x45 cannot use all of area and how to calibre in solus
Re: NEW SOLUS SOFTWARE?
haipham wrote:can you build 73x41mm print area, i think it more quality at resolution, easy to control, 80x45 cannot use all of area and how to calibre in solus
I had to unscrew my projector mount and move it a bit to even both sides for the grid to fit nicely.
Who is online
Users browsing this forum: No registered users and 1 guest