EasyCast HD Print problems

Discuss 3d printing resins
joeyalbano
Novice
Posts: 50
Joined: Mon Apr 25, 2016 3:49 pm

Re: EasyCast HD Print problems

Postby joeyalbano » Fri Jul 26, 2019 3:34 pm

Hi guys,

Can anybody tell me why my prints are coming out skewed? for example the coin I made are coming out oval not round, see picture please. If anybody can help, it'll be great. Thanks guys.
Attachments
ROUND DISC.jpg
User avatar
mongerdesigns
Solus Guru
Posts: 1892
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: EasyCast HD Print problems

Postby mongerdesigns » Sat Jul 27, 2019 6:12 pm

Check and make sure your grid had the correct aspect ratio.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
joeyalbano
Novice
Posts: 50
Joined: Mon Apr 25, 2016 3:49 pm

Re: EasyCast HD Print problems

Postby joeyalbano » Mon Jul 29, 2019 11:47 am

Hi Monger,

I just used the default settings, should I modify it? Attached is the grid that I'm using.
Attachments
grid.jpg
joeyalbano
Novice
Posts: 50
Joined: Mon Apr 25, 2016 3:49 pm

Re: EasyCast HD Print problems

Postby joeyalbano » Tue Jul 30, 2019 11:46 am

Hi Guys,

Any suggestions?
User avatar
mongerdesigns
Solus Guru
Posts: 1892
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: EasyCast HD Print problems

Postby mongerdesigns » Tue Jul 30, 2019 3:22 pm

You gotta measure it on the glass (projecting it on a paper). Make sure the width and length are correct.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Jubiler
Novice
Posts: 19
Joined: Tue Oct 20, 2015 4:09 am

Re: EasyCast HD Print problems

Postby Jubiler » Wed Aug 14, 2019 3:16 pm

Hello everyone! What can cause this problem of print.
Some prints coming ok but some they are like cut .
After printing I have in tank some uncured big pieces of resins.
Attachments
20190814_094224.jpg

Who is online

Users browsing this forum: No registered users and 3 guests