Solus Wax Resin
Let us know. I hope you are planning to take pics.
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Solus Wax Resin
I have so busy and backed up with casting I haven't had time to take pictures. I do my casting at home. I set up my flasks around 7pm. In oven at 11 with 1 hour delay. Cast at 7am. Shower and off to work. But so far the Solus Wax has been casting great.
this is a finished ring. Got lots of fill in on shank with the Blue Solus Cast. Not so with SolusWax.
this is a finished ring. Got lots of fill in on shank with the Blue Solus Cast. Not so with SolusWax.
Re: Solus Wax Resin
Some news of the soluswax resin ????
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Solus Wax Resin
Might have to wait till the JCK Vegas show is over.
I've been getting great prints with it. Casting has been up and down. Some voids and such but been able to fix using my laser.
I've been getting great prints with it. Casting has been up and down. Some voids and such but been able to fix using my laser.
Re: Solus Wax Resin
I have been having great success with the solus wax. Cure 30 minutes 5 hour rest after investing. Straight up full power to 1450 for 2.5 hours,then down to 850 to cast. No porosity,just fantastic castings.
- M-Williams
- Solus Master
- Posts:393
- Joined:Sun Nov 01, 2015 4:45 pm
Re: Solus Wax Resin
lklutts wrote:I have been having great success with the solus wax. Cure 30 minutes 5 hour rest after investing. Straight up full power to 1450 for 2.5 hours,then down to 850 to cast. No porosity,just fantastic castings.
That sounds promising. How is the print Quality?
Re: Solus Wax Resin
The blue on the right is the latest that I was testing. On the left is the first one. Resolution is much better on the blue at 42. Prints great, casts great. another pic of a filigree in white gold. Came out great.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
Excellent work Len. That casting looks legit!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Solus Wax Resin
im curious to see the casting on the ring with fonts , nice work Len
Re: Solus Wax Resin
very nice
Who is online
Users browsing this forum: No registered users and 1 guest